螺旋输送机在干法厌氧发酵系统中的应用现状及新方案研究
|
摘要
文章介绍了近年来螺旋输送机的发展现状,并对螺旋输机的理论分析、设计制造和运动仿真方面进行分析总结。指出螺旋输送机在沼气干法厌氧发酵中的可利用性,并提出适用于沼气干法厌氧发酵设备的新型螺旋输送机的研究方法。
This paper introduced the present situation of screw conveyor applied in dry anaerobic system,and its theoretical analysis,design,manufacturing,and motion simulation,were analyzed and summarized,pointing out the availability of screw conveyor in biogas dry anaerobic fermentation. And the prospect of new study of screw conveyor suitable for dry anaerobic fermentation equipment were put forward.
This paper introduced the present situation of screw conveyor applied in dry anaerobic system,and its theoretical analysis,design,manufacturing,and motion simulation,were analyzed and summarized,pointing out the availability of screw conveyor in biogas dry anaerobic fermentation. And the prospect of new study of screw conveyor suitable for dry anaerobic fermentation equipment were put forward.
引文
[1]乌兰图雅,王春光.螺旋输送装置的研究现状及未来发展[J].农机化研究,2014(11):244-248.
[2]尹忠俊,孙洁,陈兵,张连万.开式螺旋输送机输送机理分析与参数设计[J].矿山机械,2010,38(11):68-71.
[3]王东霞.输送小麦卧式螺旋输送机主要参数的选择和确定[J].理论与算法,2013(21):57-60.
[4]胡海伟.车载式饲料运输车螺旋卸料系统设计[J].农业工程,2014,4(1):102-103.
[5]张东海.螺旋输送机的优化研究[D].大连:大连理工大学,2006.
[6]李晓豁,林其岳,何洋.基于GAAA算法的螺旋钻采煤机输送机构参数的优化[J].煤炭学报,2010,35(3):498-502.
[7]向冬枝,徐余伟.螺旋输送机设计参数的选择和确定[J].水泥技术,2010(1):29-33.
[8]陈广福,徐余伟.饲料螺旋输送机设计参数的选择和确定[J].饲料工业,2008,29(15):1-5.
[9]龚玉友.炭素沥青糊料螺旋输送机设计理论研究与应用[D].长沙:中南大学,2009.
[10]王仁标.L型螺旋卸船机水平螺旋输送机理研究[D].武汉:武汉理工大学,2013.
[11]郑招强.基于PRO/E的混凝土搅拌车螺旋叶片三维造型[J].技术论坛,2009(10):44-47.
[12]赵橄培,吴庆定,陈飞,张闪影.基于Pro/E的搅拌车螺旋叶片CAD系统设计[J].机械工程师,2012(8):17-19.
[13]吕阳滨,张琪,唐利利.螺旋输送装置叶片的制造及成形工艺[J].林业机械与木工设备,2009,37(8):49-51.
[14]郭在云.试论螺旋输送机圆柱螺旋叶片简易制作工艺及安装方法[J].机电工程技术,2014,43(4):152-155.
[15]Kapur T P Meloy.Industrial modeling of spirals for optimal configuration and design:spiral geometry,fluid flow and forces on particles[J].Powder Technology,1999,102:10-18.
[16]A W.The influence of granular vortex motion onthe volumetric performance of enclosed screw conveyors[J].Powder technology,1999.104(1);56-67.
[17]Wallace W F Leung,Archer H shapiro,Robert Yarnell.Improvements in the classification of fine-particle slurriesu-sing decanter centrifuges[J].Filtration&Separation,1999,36(9):32-37.
[18]Wallace W F Leung.Torque requirement for high-solids centrifugal sludge dewatering[J].Filtration Separation,1998,35(9);883-887.
[19]Redemacher F J C.Some Aspercts of the characteristics of Vertical Screw Conveyor for Granular Material[J].Powder Tchnology,1974(9):184-190..
[20]F soavi,O Int J Mach,Tools Zurla.Performance evaluation of a new screw conveyor for metal swarf[J].Manufacl,1997,7(37)37:1188-1196.
[21]Yoshiyuki Shimizu,Peter A.Cundall.Three-Dimenstional DEM Simulatons of Bulk Handing by Screw Converyors[J].Journal of Engineering Mechanics,2001,September:864-872.
[22]Keisuke Uchida Koji Okamoto.Measurement technique on the diffusion coefficient of powder flow in a screw feeder by X-ray visualization[J].Powder Technology,2008,3:112-119.
[23]P J Owen,P W Cleary.Prediction of screw conveyor performance using the Discrete Element Method(DEM)[J].Powder Technology Corrected Proof Available online,2009,4:17.
[24]Philip J owen,Paul W cleary.Vertical screw conveyor performance:comparison of discrte element modeling with laboratory experiments[J].Seventh International Conference on CFD in the Minerals and Process Industries,2009:1230-1233.
[2]尹忠俊,孙洁,陈兵,张连万.开式螺旋输送机输送机理分析与参数设计[J].矿山机械,2010,38(11):68-71.
[3]王东霞.输送小麦卧式螺旋输送机主要参数的选择和确定[J].理论与算法,2013(21):57-60.
[4]胡海伟.车载式饲料运输车螺旋卸料系统设计[J].农业工程,2014,4(1):102-103.
[5]张东海.螺旋输送机的优化研究[D].大连:大连理工大学,2006.
[6]李晓豁,林其岳,何洋.基于GAAA算法的螺旋钻采煤机输送机构参数的优化[J].煤炭学报,2010,35(3):498-502.
[7]向冬枝,徐余伟.螺旋输送机设计参数的选择和确定[J].水泥技术,2010(1):29-33.
[8]陈广福,徐余伟.饲料螺旋输送机设计参数的选择和确定[J].饲料工业,2008,29(15):1-5.
[9]龚玉友.炭素沥青糊料螺旋输送机设计理论研究与应用[D].长沙:中南大学,2009.
[10]王仁标.L型螺旋卸船机水平螺旋输送机理研究[D].武汉:武汉理工大学,2013.
[11]郑招强.基于PRO/E的混凝土搅拌车螺旋叶片三维造型[J].技术论坛,2009(10):44-47.
[12]赵橄培,吴庆定,陈飞,张闪影.基于Pro/E的搅拌车螺旋叶片CAD系统设计[J].机械工程师,2012(8):17-19.
[13]吕阳滨,张琪,唐利利.螺旋输送装置叶片的制造及成形工艺[J].林业机械与木工设备,2009,37(8):49-51.
[14]郭在云.试论螺旋输送机圆柱螺旋叶片简易制作工艺及安装方法[J].机电工程技术,2014,43(4):152-155.
[15]Kapur T P Meloy.Industrial modeling of spirals for optimal configuration and design:spiral geometry,fluid flow and forces on particles[J].Powder Technology,1999,102:10-18.
[16]A W.The influence of granular vortex motion onthe volumetric performance of enclosed screw conveyors[J].Powder technology,1999.104(1);56-67.
[17]Wallace W F Leung,Archer H shapiro,Robert Yarnell.Improvements in the classification of fine-particle slurriesu-sing decanter centrifuges[J].Filtration&Separation,1999,36(9):32-37.
[18]Wallace W F Leung.Torque requirement for high-solids centrifugal sludge dewatering[J].Filtration Separation,1998,35(9);883-887.
[19]Redemacher F J C.Some Aspercts of the characteristics of Vertical Screw Conveyor for Granular Material[J].Powder Tchnology,1974(9):184-190..
[20]F soavi,O Int J Mach,Tools Zurla.Performance evaluation of a new screw conveyor for metal swarf[J].Manufacl,1997,7(37)37:1188-1196.
[21]Yoshiyuki Shimizu,Peter A.Cundall.Three-Dimenstional DEM Simulatons of Bulk Handing by Screw Converyors[J].Journal of Engineering Mechanics,2001,September:864-872.
[22]Keisuke Uchida Koji Okamoto.Measurement technique on the diffusion coefficient of powder flow in a screw feeder by X-ray visualization[J].Powder Technology,2008,3:112-119.
[23]P J Owen,P W Cleary.Prediction of screw conveyor performance using the Discrete Element Method(DEM)[J].Powder Technology Corrected Proof Available online,2009,4:17.
[24]Philip J owen,Paul W cleary.Vertical screw conveyor performance:comparison of discrte element modeling with laboratory experiments[J].Seventh International Conference on CFD in the Minerals and Process Industries,2009:1230-1233.