摘要
以小型液化乙烯船独立液罐绝热层为研究对象,应用液罐鞍座与层压木块等效热阻电路模型简化方法,计算层压木块的厚度。同时对热流密度和日蒸发率进行了计算,并进行了有限元温度场仿真,确认计算的正确性。
Taking the heat insulation layer of the independent liquid tank of small liquefied ethylene vessel as the research object, the short-cut method of the equivalent thermal resistance circuit model of the liquid tank cradle and the laminated wood block was used to calculate the thickness of the laminated wood block. At the same time, the heat flux density and the daily evaporation rate were calculated, and the finite element simulation of temperature field was carried out to confirm the correctness of the calculation.
引文
[1]中国船级社.散装运输液化气体船舶构造与设备规范2018[S].
[2]中国船舶工业总公司.船舶设计实用手册:结构分册[M].北京:国防工业出版社,2000.
[3]钢制压力容器———分析设计标准(2005年确认):JB 4732—1995[S].
[4]杨青松.中小型LNG船C型独立液货舱支座设计研究[D].大连:大连理工大学, 2010.
[5]杨世铭,陶文铨.传热学[M]. 4版.北京:高等教育出版社,2006.
[6]刘健奕. LPG船液罐设计及其支撑结构温度场分析[D].大连:大连理工大学, 2012.
[7]杨青松,陆从红,纪桌尚.中小型LNG船货罐鞍座及附近船体材料分布研究[J].中国舰船研究,2010,5(4):40-43.
[8]顾俊,王凡超.液化气运输船温度场分布研究及钢材匹配[J].船舶与海洋工程,2012(4):1-5.
[9]刘文华,蒋秋申,陆晟.中小型液化天然气船C型独立液货舱鞍座温度场分布[J].船舶设计通讯, 2014(S1):35-39.
[10]刘文华,陆晟.中小型LNG船C型独立液货舱蒸发率计算[J].船舶设计通讯,2012(1):25-28.
[11]凌桂龙,李战芬. ANSYS 14.0从入门到精通[M].北京:清华大学出版社,2013.
[12]陈宏,茅柳柳,陶芳.液化天然气船独立液罐结构的计算与有限元分析[J].机械制造, 2018,56(8):43-46,53.