摘要
针对组合式变压器的直流电阻质量判断存在的问题,对直流电阻测量进行研究,对绕组温度对直流电阻测量结论的影响进行分析。研究结果表明,现场交接试验应以变压器内实际平均油温作为绕组温度。
In view of the problems of DC resistance quality judgment of pad-mounted transformer,the DC resistance measurement is researched.The influence of winding temperature on DC resistance measurement conclusion is analyzed.The Results is demonstrated that in the hand-over test of pad-mounted transformer the average temperature of the oil should be determined to be the winding temperature.
引文
[1]路长柏,朱英浩,张怀灵,等.电力变压器计算[M].哈尔滨:黑龙江科学技术出版社,1990.
[2] GB/T 1094.1-2013.电力变压器第1部分:总则[S].
[3] GB/T6451-2015.油浸式电力变压器技术参数和要求[S].
[4] JB/T 10217-2013.组合式变压器[S].
[5]蔡定国,杨祥江.干式变压器三相直流电阻不平衡的研究[J].变压器,2014,51(05):45-49.
[6] GB 50150-2016.电气装置安装工程电气设备交接试验标准[S].
[7]严玉婷,江健武,王亚舟,等.变压器直流电阻测试原理及现场缺陷情况分析[J].高压电器,2010,46(10):97-101.
[8]宋文翠,陈朋,孙成田,等.变压器绕组直流电阻异常的分析与处理[J].变压器, 2017, 54(05):66-69.
[9]李伟,齐杭宾,冯宝纯.基于直流电阻测量法的变压器螺柱焊接熔合度检测技术[J].变压器,2017,54(12):22-24.
[10]涂明涛,杨清华.典型变压器直流电阻缺陷的分析与诊断[J].高电压技术,2008(02):419-421.
[11] GB/T 25446-2010.油浸式非晶合金铁心配电变压器技术参数和要求[S].
[12] JB/T 501-2006.电力变压器试验导则[S].