摘要
在现如今的产线生产过程中,尤其在自动化工位,如果发生质量问题,就会导致花费大量时间检查,文章通过对某装配工位引入过程失效模式及影响分析(PFMEA),找出风险优先数(RPN)最高的工序,进行改善,从而保证生产过程中的质量问题,减少浪费,满足精益生产要求。
In today's production line production process, especially in automated workstations, if quality problems occur, it will lead to a lot of time to check. The article introduces Process Failure Mode and Effects Analysis(PFMEA) to an assembly station to find the highest process of the Risk Priority Number(RPN) and improve it, so as to ensure quality in the production process, reduce waste and meet lean production requirements.
引文
[1]邓秋艳.PFMEA与放错技术在汽车拉手装配中的应用[J].工业技术经济,2008,27(8):121-124.
[2]周艳华.PFMEA在生产过程中的应用[J].轻型汽车技术,2017,6.
[3]陈小伟.基于FMEA施耐德产品质量案例分析[D].上海:华东理工大学,2014.
[4]吕晓如.关于PFMEA在汽车装配中的应用研究[J].汽车实用技术,2015,8.
[5]盛精,王君,罗善明.采用模糊理论的零部件工艺PFMEA评估[J].华侨大学学报(自然科学版),2015,36(6):609-614.