TC11钛合金TiAlSiN涂层微织构表面脂润滑摩擦性能研究
|
摘要
研究了激光微织构处理后材料表面覆盖TiAlSiN涂层在脂润滑条件下的摩擦磨损性能。使用声光调Q二极管Nd:YAG激光器在TC11钛合金表面进行织构化处理。使用磁控溅射设备在织构后表面加镀覆TiAlSiN涂层。通过Rtec通用摩擦磨损试验机考察涂层织构在脂润滑条件下的摩擦磨损性能。通过加工不同密度研究织构形貌参数对摩擦性能的影响。研究结果表明:在室温滑动摩擦条件下TiAlSiN涂层能够保护基体减小磨损,表面织构能够进一步减小摩擦系数。在织构密度为30%时摩擦系数最小。
Studied the tribology performance of TiAlSiN coated and laser textured surface under grease lubrication. TC11 surface was textured by Nd: YAG laser. The tribology performance of samples was measured by Rtec tribometer after using magnetron sputtering to process TiAlSiN coating. The study find that textured TiAlSiN coating can protect TC11 substrate from surface wear and reduce friction coefficient. Samples get minimum friction coefficient under 30% texturing density.
Studied the tribology performance of TiAlSiN coated and laser textured surface under grease lubrication. TC11 surface was textured by Nd: YAG laser. The tribology performance of samples was measured by Rtec tribometer after using magnetron sputtering to process TiAlSiN coating. The study find that textured TiAlSiN coating can protect TC11 substrate from surface wear and reduce friction coefficient. Samples get minimum friction coefficient under 30% texturing density.
引文
[1]BANERJEEA D.Perspectives on Titanium Science and Technology[J].Acta Materialia,2013,61(3):844-879.
[2]ALAM M O,HASEEB A S M A.Response of Ti-6Al-4V and Ti-24Al-11Nb alloys to dry sliding wear against hardened steel[J].Tribology International,1999,35(6):357-362.
[3]吴轩璇,黄建云,柏林,等.HVOF制备CuNiIn涂层对TC4-DT钛合金抗微动磨损的改善[J].航空制造技术,2016(14):41-46.WU Xuan-xuan,HUANG Jian-yun,Bo Lin,et al.Improvement of Fretting Wear Resistance of TC4-DT Titanium Alloy Prepared by CuNiIn Coating Prepared by HVOF[J].Aeronautical Manufacturing Technology,2016(14):41-46.
[4]SEGU D Z,KIM J H,SI G C,et al.Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface[J].Surface&Coatings Technology,2013,232(10):504-514.
[5]RIPOLL M R,SIMIC R,BRENNER J,et al.Friction and Lifetime of Laser Surface-Textured and MoS2-Coated Ti6Al4V Under Dry Reciprocating Sliding[J].Tribology Letters,2013,51(2):261-271.
[6]TAGAWA N,ANDOH H,TANI H.Study on Lubricant Depletion Induced by Laser Heating in Thermally Assisted Magnetic Recording Systems:Effect of Lubricant Thickness and Bonding Ratio[J].Tribology Letters,2010,37(2):411-418.
[7]LI J,XIONG D,HUANG Z,et al.Effect of Ag and CeO2 on friction and wear properties of Ni-base composite at high temperature[J].Wear,2009,267(1-4):576-584.
[8]MURAKAMI T,OUYANG J H,SASAKI S,et al.High-temperature tribological properties of spark-plasma-sintered Al2O3 composites containing barite-type structure sulfates[J].Tribology International,2007,40(2):246-253.
[9]AOUADI S M,LUSTER B,KOHLI P,et al.Progress in the development of adaptive nitride-based coatings for high temperature tribological applications[J].Surface&Coatings Technology,2009,204(6-7):962-968.
[10]BASNYAT P,LUSTER B,MURATORE C,et al.Surface texturing for adaptive solid lubrication[J].Surface&Coatings Technology,2008,203(1-2):73-79.
[11]QIN Y,XIONG D,LI J.Tribological properties of laser surface textured and plasma electrolytic oxidation duplex-treated Ti6Al4V alloy deposited with MoS2 film[J].Surface&Coatings Technology,2015(269):266-272.
[12]ZHANG K,DENG J,LEI S,et al.Effect of micro/nano-textures and burnished MoS2 addition on the tribological properties of PVD TiAlNcoatings against AISI 316 stainless steel[J].Surface&Coatings Technology,2016(291):382-395.
[13]SHIMIZU T,TAI K,YANG M.Micro-texturing of DLC Thin Film Coatings and its Tribological Performance Under Dry Sliding Friction for Microforming Operation[J].Procedia Engineering,2014(81):1884-1889.
[14]SHUM P W,ZHOU Z F,LI K Y.Friction and wear reduction of hard TiAlSiN coatings by an integrated approach of laser surface texturing and high-energy ion implantation[J].Surface&Coatings Technology,2014(259):136-140.
[15]HE D,ZHENG S,PU J,et al.Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film[J].Tribology International,2015,(82):20-27.
[2]ALAM M O,HASEEB A S M A.Response of Ti-6Al-4V and Ti-24Al-11Nb alloys to dry sliding wear against hardened steel[J].Tribology International,1999,35(6):357-362.
[3]吴轩璇,黄建云,柏林,等.HVOF制备CuNiIn涂层对TC4-DT钛合金抗微动磨损的改善[J].航空制造技术,2016(14):41-46.WU Xuan-xuan,HUANG Jian-yun,Bo Lin,et al.Improvement of Fretting Wear Resistance of TC4-DT Titanium Alloy Prepared by CuNiIn Coating Prepared by HVOF[J].Aeronautical Manufacturing Technology,2016(14):41-46.
[4]SEGU D Z,KIM J H,SI G C,et al.Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface[J].Surface&Coatings Technology,2013,232(10):504-514.
[5]RIPOLL M R,SIMIC R,BRENNER J,et al.Friction and Lifetime of Laser Surface-Textured and MoS2-Coated Ti6Al4V Under Dry Reciprocating Sliding[J].Tribology Letters,2013,51(2):261-271.
[6]TAGAWA N,ANDOH H,TANI H.Study on Lubricant Depletion Induced by Laser Heating in Thermally Assisted Magnetic Recording Systems:Effect of Lubricant Thickness and Bonding Ratio[J].Tribology Letters,2010,37(2):411-418.
[7]LI J,XIONG D,HUANG Z,et al.Effect of Ag and CeO2 on friction and wear properties of Ni-base composite at high temperature[J].Wear,2009,267(1-4):576-584.
[8]MURAKAMI T,OUYANG J H,SASAKI S,et al.High-temperature tribological properties of spark-plasma-sintered Al2O3 composites containing barite-type structure sulfates[J].Tribology International,2007,40(2):246-253.
[9]AOUADI S M,LUSTER B,KOHLI P,et al.Progress in the development of adaptive nitride-based coatings for high temperature tribological applications[J].Surface&Coatings Technology,2009,204(6-7):962-968.
[10]BASNYAT P,LUSTER B,MURATORE C,et al.Surface texturing for adaptive solid lubrication[J].Surface&Coatings Technology,2008,203(1-2):73-79.
[11]QIN Y,XIONG D,LI J.Tribological properties of laser surface textured and plasma electrolytic oxidation duplex-treated Ti6Al4V alloy deposited with MoS2 film[J].Surface&Coatings Technology,2015(269):266-272.
[12]ZHANG K,DENG J,LEI S,et al.Effect of micro/nano-textures and burnished MoS2 addition on the tribological properties of PVD TiAlNcoatings against AISI 316 stainless steel[J].Surface&Coatings Technology,2016(291):382-395.
[13]SHIMIZU T,TAI K,YANG M.Micro-texturing of DLC Thin Film Coatings and its Tribological Performance Under Dry Sliding Friction for Microforming Operation[J].Procedia Engineering,2014(81):1884-1889.
[14]SHUM P W,ZHOU Z F,LI K Y.Friction and wear reduction of hard TiAlSiN coatings by an integrated approach of laser surface texturing and high-energy ion implantation[J].Surface&Coatings Technology,2014(259):136-140.
[15]HE D,ZHENG S,PU J,et al.Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film[J].Tribology International,2015,(82):20-27.