文摘
In this study, poly(allylamine hydrochloride) (PAA/HCl) was cross-linked with fermentation bacterial waste (Escherichia coli) in order to introduce a large amount of amine groups as binding sites for potassium hexachloroplatinate(IV), as a model anionic pollutant. The sorption performance of PAA/HCl-modified E. coli was greatly affected by the dosages of PAA/HCl and crosslinker (epichlorohydrin, ECH), and by the pH of the modification reaction medium. These factors were optimized through the response surface methodology (RSM). A three-level factorial Box-Behnken design was performed, and a second-order polynomial model was successfully used to describe the effects of PAA/HCl, ECH and the pH on the Pt(IV) uptake (R2 = 0.988). The optimal conditions that were obtained from the RSM were 0.49 g of PAA/HCl, 0.05 mL of ECH and pH 10.02, with 1.0 g of dried E. coli biomass. The biosorption isotherm and kinetics studies were carried out in order to evaluate the sorption potential of the PAA/HCl-modified E. coli that was prepared under the optimized conditions. The sorption performance of the developed bacterial biosorbent was 4.36 times greater than that of the raw E. coli. Desorption was carried out using 0.05 M acidified thiourea and the biosorbent was successfully regenerated and reused up to four cycles. Therefore, this simple and cost-effective method suggested here is a useful modification tool for the development of high performance biosorbents for the recovery of anionic precious metals.
