Preparation and examination of monolithic in-needle extraction (MINE) device for the direct analysis of liquid samples

详细信息    查看全文

• 作者：Monika Pietrzy¨½ska ; ^{monikapietrzynska@gmail.com} ; Adam Voelkel ; Katarzyna Bielicka-Daszkiewicz
• 关键词：Monolithic materials ; In-needle extraction ; Needle trap device ; Poly(styrene-divinylbenzene)
• 刊名：Analytica Chimica Acta
• 出版年：2013
• 出版时间：7 May, 2013
• 年：2013
• 卷：776
• 期：Complete
• 页码：50-56
• 全文大小：1859 K

文摘

Combination of extraction and chromatographic techniques opens NEW possibilities in sample preparation area. Macroporous poly(styrene-divinylbenzene) (PS-DVB) monoliths were prepared by in situ polymerization in stainless steel needles. The surface of stainless steel needle was modified earlier by the silane coupling agent. Monolithic materials located inside needles were used as the in-needle extraction device. Scanning electron microscope (SEM) images were obtained for nine monoliths. Spectra of prepared materials were also performed with the use of two techniques: Attenuated Total Reflectance (ATR) and Fourier Transform Infrared Spectroscopy (FTIR). The new monolithic in-needle extraction (MINE) devices were used in the preparation of a series of test water samples for chromatographic analysis. The extraction of phenolic compounds from water samples was carried out by pumping liquid samples through the MINE device. Obtained results indicate a high efficiency of in-needle extraction systems based on monolithic materials. Breakthrough volume and the sorption efficiency of prepared monolithic in-needle extraction devices were determined experimentally. The achieved recovery was close to 90 % , and determined LOQ values varied between 0.4 and 6 ¦Ìg.