Efficiency Enhancement of Polymer Solar Cells by Applying Poly(vinylpyrrolidone) as a Cathode Buffer Layer via Spin Coating or Self-Assembly

详细信息    查看全文

• 作者：Haitao Wang ; Wenfeng Zhang ; Chenhui Xu ; Xianghong Bi ; Boxue Chen ; Shangfeng Yang
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2013
• 出版时间：January 9, 2013
• 年：2013
• 卷：5
• 期：1
• 页码：26-34
• 全文大小：355K
• 年卷期：v.5,no.1(January 9, 2013)
• ISSN：1944-8252

文摘

A non-conjugated polymer poly(vinylpyrrolidone) (PVP) was applied as a new cathode buffer layer in P3HT:PCBM bulk heterojunction polymer solar cells (BHJ-PSCs), by means of either spin coating or self-assembly, resulting in significant efficiency enhancement. For the case of incorporation of PVP by spin coating, power conversion efficiency (PCE) of the ITO/PEDOT:PSS/P3HT:PCBM/PVP/Al BHJ-PSC device (3.90%) is enhanced by 29% under the optimum PVP spin-coating speed of 3000 rpm, which leads to the optimum thickness of PVP layer of 3 nm. Such an efficiency enhancement is found to be primarily due to the increase of the short-circuit current (J_sc) (31% enhancement), suggesting that the charge collection increases upon the incorporation of a PVP cathode buffer layer, which originates from the conjunct effects of the formation of a dipole layer between P3HT:PCBM active layer and Al electrodes, the chemical reactions of PVP molecules with Al atoms, and the increase of the roughness of the top Al film. Incorporation of PVP layer by doping PVP directly into the P3HT:PCBM active layer leads to an enhancement of PCE by 13% under the optimum PVP doping ratio of 3%, and this is interpreted by the migration of PVP molecules to the surface of the active layer via self-assembly, resulting in the formation of the PVP cathode buffer layer. While the formation of the PVP cathode buffer layer is fulfilled by both fabrication methods (spin coating and self-assembly), the dependence of the enhancement of the device performance on the thickness of the PVP cathode buffer layer formed by self-assembly or spin coating is different, because of the different aggregation microstructures of the PVP interlayer.

Keywords:

polymer solar cells; poly(vinylpyrrolidone); spin coating; self-assembly; power conversion efficiency; cathode buffer layer