A complete real-time Ethernet solution for numerical control systems

详细信息    查看全文

• 作者：Yong-Qing Wang (1)
  Fu-Chang Huang (1) (2)
  
• 关键词：Real ; time Ethernet ; NC systems ; Cut through ; Process latency ; Time synchronization
• 刊名：The International Journal of Advanced Manufacturing Technology
• 出版年：2014
• 出版时间：September 2014
• 年：2014
• 卷：74
• 期：1-4
• 页码：89-100
• 全文大小：1,340 KB
• 参考文献：1. Wang K, Zhang C, Xu X, Ji S, Yang L (2013) A CNC system based on real-time Ethernet and Windows NT. Int J Adv Manuf Technol 65(9鈥?2):1383鈥?395 CrossRef
  2. Zhou ZD, Xie JM, Chen YP, Chen B, Qiu ZM, Wong YS, Zhang YF (2004) The development of a fieldbus-based open-CNC system. Int J Adv Manuf Technol 23(7鈥?):507鈥?13 CrossRef
  3. Wang T, Wang L, Liu Q (2011) A three-ply reconfigurable CNC system based on FPGA and field-bus. Int J Adv Manuf Technol 57(5鈥?):671鈥?82 CrossRef
  4. Farsi M, Ratcliff K, Barbosa M (1999) An overview of controller area network. Comput Control Eng J 10(3):113鈥?20 CrossRef
  5. Seitz B, Samuelian M (2007) A universal approach for implementing real-time industrial Ethernet. IXXAT Automation, GmbH
  6. Eidson J, Lee, K (2002) IEEE 1588 standard for a precision clock synchronization protocol for networked measurement and control systems. In Sensors for Industry Conference, 2002. 2nd ISA/IEEE, pp 98鈥?05
  7. Christian S (2009) Implementation of an industrial real-time Ethernet interface, the universal approach using FPGAs. IXXAT Automation, GmbH
  8. Ding M, Xu X, Yan Y, Xiong Z (2012) An FPGA-Based real-time solution for networked motion control systems. In Proceedings of the 5th international conference on Intelligent Robotics and Applications-Volume Part II, pp 581鈥?91
  9. Khalilzad NM, Yekeh F, Asplund L, Pordel M (2011) FPGA implementation of real-time Ethernet communication using RMII interface. Communication Software and Networks (ICCSN), 2011 I.E. 3rd International Conference on. IEEE, pp 35-39
  10. Chen YD, Xing CX, Tao Y, Sun K (2013) FPGA implementation of real-time Ethernet for motion control. Advances in Mechanical Engineering :1鈥夆埣鈥?
  11. Schumacher M, Wisniewski L, Jasperneite J, Schriegel S (2013) Node to node synchronization accuracy requirements of Dynamic Frame Packing. Precision Clock Synchronization for Measurement Control and Communication (ISPCS), 2013 International IEEE Symposium on. IEEE, pp 53-58
  12. Lian Y, Han Y, Huo M, Chen JL, Zhang Y (2008) Design and FPGA verification of a novel reliable real-time data transfer system. J Zhejiang Univ Sci A 9(10):1406鈥?410 CrossRef
  13. Zhang XL, Tang XQ, Chen JH, Zhou HC, Wu T (2007) Hierarchical real-time networked CNC system based on the transparent model of industrial Ethernet. Int J Adv Manuf Technol 34(1):161鈥?67 CrossRef
  14. Balasubramanian S, Harris K R, Moldovansky A (2003) A frequency compensated clock for precision synchronization using IEEE 1588 protocol and its application to Ethernet. Proceedings of the workshop on IEEE, pp 91-94
  15. Xu X, Xiong Z, Wu J, Zhu X (2013) High-precision time synchronization in real-time Ethernet-based CNC systems. Int J Adv Manuf Technol 65(5鈥?):1157鈥?170 CrossRef
  16. Felser M (2005) Real-time ethernet-industry prospective. Proc IEEE 93(6):1118鈥?129 CrossRef
  17. Nielsen A (2008) AMP NETCONNECT Guide to ISO/IEC 11801 2nd Edition Including Amendment 1 Schaffhausen. Tyco Electronics, Switzerland, p 11
  18. Jasperneite J, Schumacher M, Weber K (2007) Limits of increasing the performance of industrial Ethernet protocols. IEEE Conference on Emerging Technologies and Factory Automation, IEEE 17-24
  19. Prytz G (2008) A performance analysis of EtherCAT and PROFINET IRT. IEEE International Conference on Emerging Technologies and Factory Automation, IEEE 408-415
  20. Vitturi S, Peretti L, Seno L, Zigliotto M, Zunino C (2011) Real-time Ethernet networks for motion control. Comput Stand Interfaces 33(5):465鈥?76 CrossRef
  21. Correll K, Barendt N, Branicky M (2005) Design considerations for software only implementations of the IEEE 1588 precision time protocol. Conf IEEE 1588:11鈥?5
  22. Eidson JC (2010) Measurement, control, and communication using IEEE 1588. Springer Publishing Company Incorporated, London, 2010
  23. Huang J, Liu P, Yang RM (2010) Design of the slave clock node about IEEE 1588 precise clock synchronization protocol. Appl Electron Tech 7:94鈥?7
  24. Wang YQ, Huang FC, Tao Y, Mu RB (2014) Relay-style digital speed measurement method and dynamic position subdivision method. Microprocess Microsyst 38(1):82鈥?7 CrossRef
  
• 作者单位：Yong-Qing Wang (1)
  Fu-Chang Huang (1) (2)
  
  1. Department of Mechanology, Dalian University of Technology, Dalian, 116024, People鈥檚 Republic of China
  2. No.18, Siemens Road Jiangning Development Zone, Nanjing, People鈥檚 Republic of China, 211100
  
• ISSN：1433-3015

文摘

This paper proposes a complete real-time Ethernet (RTE) solution including master and slave controllers for numerical control (NC) systems. To meet the development tendency of NC systems moving toward multi-axis coordination, high speed and high precision, one type of RTE architecture is built up with a dual ring topology. The function blocks of master/slave nodes are designed to realize the real-time communication capabilities using embedded CPU and field programmable gate array (FPGA) technologies. To reduce the minimum achievable cycle time, a cut-through transmission mechanism is employed to decrease the process latency at slave nodes, and the synchronization frame is optimized to shorten the frame duration. In order to synchronize the nodes of RTE-based NC systems accurately, a time synchronization strategy is scheduled and a proportion-integration (PI)-based phase-locked loop (PLL) is designed to keep the master clock and the slave clocks in step stably. The theoretical analysis and experimental results show that the proposed RTE solution can achieve good real-time performance with low process latency and high time-synchronization accuracy, which satisfies the real-time communication requirements of RTE-based NC systems in an economical way.