Using a Thermal Proxy to Examine Sediment–Water Exchange in Mid-Continental Shelf Sandy Sediments

详细信息    查看全文

• 作者：William B. Savidge ; Alicia Wilson ; Gwendolyn Woodward
• 关键词：Continental shelf ; Permeable sediments ; Sediment–water exchange ; Inverse model
• 刊名：Aquatic Geochemistry
• 出版年：2016
• 出版时间：December 2016
• 年：2016
• 卷：22
• 期：5-6
• 页码：419-441
• 全文大小：3652KB
• 刊物类别：Earth and Environmental Science
• 刊物主题：Geochemistry; Hydrology/Water Resources; Hydrogeology; Water Quality/Water Pollution;
• 出版者：Springer Netherlands
• ISSN：1573-1421
• 卷排序：22

文摘

Fluid exchange across the sediment–water interface in a sandy open continental shelf setting was studied using heat as a tracer. Summertime tidal oscillation of cross-shelf thermal fronts on the South Atlantic Bight provided a sufficient signal at the sediment–water interface to trace the advective and conductive transport of heat into and out of the seabed, indicating rapid flushing of ocean water through the upper 10–40 cm of the sandy seafloor. A newly developed transport model was applied to the in situ temperature data set to estimate the extent to which heat was transported by advection rather than conduction. Heat transported by shallow 3-D porewater flow processes was accounted for in the model by using a dispersion term, the depth and intensity of which reflected the depth and intensity of shallow flushing. Similar to the results of past studies in shallower and more energetic nearshore settings, transport of heat was greater when higher near-bed velocities and shear stresses occurred over a rippled bed. However, boundary layer processes by themselves were insufficient to promote non-conductive heat transport. Advective heat transport only occurred when both larger boundary layer stresses and thermal instabilities within the porespace were present. The latter process is dependent on shelf-scale heating and cooling of bottom water associated with upwelling events that are not coupled to local-scale boundary layer processes.