Improvement of the electrochemical properties of a LiNi_0.5Mn_1.5O₄ cathode material formed by a new solid-state synthesis method

详细信息    查看全文

• 作者：Changmei Jiao ; Tong Meng ; Honghong Lu…
• 关键词：LiNi0.5Mn1.5O4 ; Solid ; state synthesis ; Calcination process ; High voltage cathode material ; Lithium ; ion batteries
• 刊名：Journal of Solid State Electrochemistry
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：21
• 期：2
• 页码：495-501
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Physical Chemistry; Electrochemistry; Energy Storage; Characterization and Evaluation of Materials; Analytical Chemistry; Condensed Matter Physics;
• 出版者：Springer Berlin Heidelberg
• ISSN：1433-0768
• 卷排序：21

文摘

In order to avoid the shortcomings of large particle size and poor uniformity of material synthesized by the traditional solid-state method, this paper utilizes a simple improvement of calcination process (i.e., calcination–milling–recalcination) based on the traditional solid-state synthesis to successfully prepare a large number of well-distributed, micrometer-sized, spherical secondary LiNi_0.5Mn_1.5O₄ particles. Each particle is composed of nano- and/or sub-micrometer-sized grains. Results of the electrochemical performance tests show that the material exhibits a remarkable cycle performance and rate capability compared with that obtained from traditional synthesis method; the spherical LiNi_0.5Mn_1.5O₄ particles can deliver a large capacity of 135.8 mAh g−1 at a 1 C discharge rate with a high retention of 77 % after 741 cycles and a good capacity of 105.9 mAh g−1 at 10 C. Cyclic voltammetry measurements confirm that the significantly improved electrochemical properties are due to enhanced electronic conductivity and lithium-ion diffusion coefficient resulting from the optimized morphology and particle size. This improved method is more suitable for mass production.