Numerical Investigation of Rotation Effects on Anti-vortex Film-Cooling Holes
详细信息    查看全文
  • 作者:Nabeel Al-Zurfi ; Ali Turan ; Adel Nasser
  • 关键词:Anti ; vortex holes ; Rotation ; Large eddy simulation ; Film ; cooling effectiveness
  • 刊名:Flow, Turbulence and Combustion
  • 出版年:2016
  • 出版时间:January 2016
  • 年:2016
  • 卷:96
  • 期:1
  • 页码:133-162
  • 全文大小:12,564 KB
  • 参考文献:1.Goldstein, R.J., Eckert, E.R.G.: Effects of hole geometry and density on three-dimensional film cooling. Int. J. Heat Mass Transfer 17, 595鈥?07 (1974)CrossRef
    2.Andreopoulous, J., Rodi, W.: Experimental Investigation of Jets in Crossflow. J. Fluid Mech. 138, 93鈥?27 (1984)CrossRef
    3.Ammari, H.D., Hay, N., Lampard, D.: The effect of density ratio on the heat transfer coefficient from a film cooled flat plate. ASME J. Turbomach. 112, 444鈥?50 (1990)CrossRef
    4.Walters, D.K., Leylek, J.H.: A detailed analysis of film-cooling physics: Part I鈥攕treamwise injection with cylindrical holes. ASME J. Turbomech. 122, 102鈥?12 (2000)CrossRef
    5.Iourokina, I.V., Lele, S.K.: Large Eddy Simulation of Film-Cooling Above the Flat Surface with a Large Plenum and Short Exit Holes, pp 9鈥?2. 44th Aerospace Sciences Meeting and Exhibit, Reno (2006)
    6.Xu, G., Zhu, J., Tao, Z.: Application of the TLVA model for predicting film cooling under rotating frames. Int. J. Heat Mass Transfer 53, 3013鈥?022 (2010)CrossRef MATH
    7.Zhu, J., Wang, K., Nie, C.: Computational research on film cooling under rotating frame by an anisotropic turbulence model. Propuls. Power 2, 20鈥?9 (2013)CrossRef
    8.Heidmann, J.D.: A Numerical Study of Anti-Vortex Film Cooling Designs at High Blowing Ratio, NASA/TM鈥?008-215209, pp 1鈥?1 (2008)
    9.Heidmann, J.D., Ekkad, S.: A novel antivortex turbine film-cooling hole concept. J. Turbomach. ASME 130, 031020鈥? (2008)CrossRef
    10.Soe, M., Hong, D.: Analysis of Film Cooling Effectiveness on Anti-vortex Hole, 978-1-61284-459-6/11/$26.00 鈷?011 IEEE, pp 4763鈥?766 (2011)
    11.Farhadi, R., Ramezanizadeh, M., Taeibi, M., Salimi, M.: Compound triple jets film cooling improvements via velocity and density ratios: large eddy simulation. J. Fluids Eng., ASME 133, 1鈥?3 (2011)
    12.Abdelmohimen, Higazy: LES of turbulent mixing in anti-vortex film cooling flows. Int. J. Multidiscip. Curr. Res., 146鈥?52 (2013)
    13.Yao, Y., Zhang, J., Yang, Y.: Numerical study on film cooling mechanism and characteristics of cylindrical holes with branched jet injections. Propuls. Power Res. 2, 30鈥?7 (2013)CrossRef
    14.Alzurfi, N., Turan, A.: A numerical simulation of the effects of swirling flow on jet penetration in a rotating channel. Flow Turbul. Combust. 94, 415鈥?38 (2015)CrossRef
    15.Smagorinsky, J.: General circulation experiment with the primitive equations. I. the basic experiment. Monthly Weather Rev. 91(3), 99鈥?64 (1963)CrossRef
    16.Alzurfi, N., Turan, A.: A numerical study of rotation effects on jets effusing from inclined holes into a cross-flow. J. Turbul. 16(11), 1036鈥?057 (2015)CrossRef
    17.Van Driest, E.R: On the turbulent flow near a wall. J. Aerosol Sci. 23(11), 1007鈥?011 (1956)CrossRef MATH
    18.Peyret, R.: Handbook of computational fluid mechanics. Academic, San Diego (1996)
    19.Alzurfi, N., Turan, A.: LES of density ratio effects on film cooling under rotating frame. Heat Mass Transf. (2015). doi:10.鈥?007/鈥媠00231-015-1576-5 . in press
    20.Ferziger, J. H., Peric, M.: Computational Methods for Fluid Dynamics, 3rd edn. Springer, Berlin (2002)CrossRef MATH
    21.Patankar, S.V., Spalding, D.B.: A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows. Int. J. Heat Mass Transfer 15, 1787 (1972)CrossRef MATH
    22.Hoffmann, K., Chiang, S.: Computational fluid dynamics, vol. 1, 4th edn. Engineering Education System, Wichita (2000)
    23.Ajersch, P., Zhou, J.M., Ketler, S., Salcudean, M., Gartshore, I.S.: Multiple jets in a cross flow: detail measurements and numerical simulations. J. Turbomachinery 1192, 330鈥?42 (1997)CrossRef
  • 作者单位:Nabeel Al-Zurfi (1) (2)
    Ali Turan (1)
    Adel Nasser (1)

    1. School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, Sackville Street, George Begg Building, M13 9PL, Manchester, UK
    2. Mechanical Engineering Department, College of Engineering, University of Kufa, Najaf, Iraq
  • 刊物类别:Engineering
  • 刊物主题:Physics
    Mechanics
    Automotive Engineering
  • 出版者:Springer Netherlands
  • ISSN:1573-1987
文摘
The anti-vortex film-cooling technique under rotating conditions is investigated using large eddy simulation (LES) due to its complex mixture between the main stream flow, film-cooling flow, and the flow through the anti-vortex holes. The film-cooling was enhanced by placing two small injection holes (anti-vortex holes) just downstream of the main cooling hole in order to modify the approaching boundary layer flow and its interaction with the film-cooling jet. A geometry of a single row of rectangular holes inclined normally on a flat plate is used as the baseline case. The finite volume method and the unsteady SIMPLE algorithm were applied on a non-uniform staggered grid. The simulations were performed for four different values of rotation number (Ro) of 0.0, 0.03021, 0.06042, and 0.12084 and a jet Reynolds number of 4,700. Three different values of velocity ratio (coolant jets / main jet velocity), namely 0.5, 1, and 1.5, were studied. One position of the anti-vortex holes is investigated with density ratio (coolant density / main stream density), namely 1.04. The present simulation is carried out using an in-house FORTRAN code. Numerical calculations of flow field and film-cooling effectiveness are validated with reported LES results. It was shown that the rotational speed is the dominant factor in determining the cooling effectiveness level. The jet footprint of the anti-vortex is broader than for the single jet case and increases as Ro increases. Furthermore, it was also found that the anti-vortex technique used in this study reduces the mixing of the main stream and the coolant jets and improves the film-cooling effectiveness using the same amount of coolant fluid as was used in the case of a single jet. It was also shown that the anti-vortex holes create reverse vortices against the main vortices that are created by the main hole. These reverse vortices help to keep the coolant jet flow near the wall. Keywords Anti-vortex holes Rotation Large eddy simulation Film-cooling effectiveness
NGLC 2004-2010.National Geological Library of China All Rights Reserved.
Add:29 Xueyuan Rd,Haidian District,Beijing,PRC. Mail Add: 8324 mailbox 100083
For exchange or info please contact us via email.