Nanoindentation Creep Behavior of an Al_0.3CoCrFeNi High-Entropy Alloy

详细信息    查看全文

• 作者：Lijun Zhang ; Pengfei Yu ; Hu Cheng ; Huan Zhang…
• 刊名：Metallurgical and Materials Transactions A
• 出版年：2016
• 出版时间：December 2016
• 年：2016
• 卷：47
• 期：12
• 页码：5871-5875
• 全文大小：1,739 KB
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Materials Science
  Metallic Materials
  Structural Materials
  Physical Chemistry
  Ceramics,Glass,Composites,Natural Materials
  
• 出版者：Springer Boston
• ISSN：1543-1940
• 卷排序：47

文摘

Nanoindentation creep behavior was studied on a coarse-grained Al_0.3CoCrFeNi high-entropy alloy with a single face-centered cubic structure. The effects of the indentation size and loading rate on creep behavior were investigated. The experimental results show that the hardness, creep depth, creep strain rate, and stress exponent are all dependent on the holding load and loading rate. The creep behavior shows a remarkable indentation size effect at different maximum indentation loads. The dominant creep mechanism is dislocation creep at high indentation loads and self-diffusion at low indentation loads. An obvious loading rate sensitivity of creep behavior is found under different loading rates for the alloy. A high loading rate can lead to a high strain gradient, and numerous dislocations emerge and entangle together. Then during the holding time, a large creep deformation characteristic with a high stress exponent will happen.