Correlation Between Shear Punch and Tensile Strength for Low-Carbon Steel and Stainless Steel Sheets

详细信息    查看全文

• 作者：R. Mahmudi (1) r> M. Sadeghi (1) r>
• 关键词：shear punch ; steel sheet ; tensile test
• 刊名：Journal of Materials Engineering and Performance
• 出版年：2013
• 出版时间：February 2013
• 年：2013
• 卷：22
• 期：2
• 页码：433-438
• 全文大小：448KB
• 参考文献：1. G.E. Dieter, / Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, 1986 r> 2. R. Mahmudi and R. Mohammadi, Effect of Gauge Length on Uniaxial Deformation-Energy Components of Copper and Brass Sheets, / J. Mater. Process. Technol., 2002, rong class="a-plus-plus">121rong>, p 185-90 rnal" href="http://dx.doi.org/10.1016/S0924-0136(01)01036-6">CrossRef r> 3. A. Askariani, R. Mahmudi, and M.H. Pishbin, Comparison of Tearing Energy of Interstitial-Free (IF) and Low-Carbon (LC) Steel Sheets, / Steel Res. Int., 2010, rong class="a-plus-plus">81rong>, p 1097-101 rnal" href="http://dx.doi.org/10.1002/srin.201000129">CrossRef r> 4. T.M. Chang and H.W. Swift, Shearing of Metal Bars, / J. Inst. Met., 1950, rong class="a-plus-plus">78rong>, p 119-46 r> 5. R.K. Guduru, K.A. Darling, R. Kishore, R.O. Scattergood, C.C. Koch, and K.L. Murty, Evaluation of Mechanical Properties Using Shear-Punch Testing, / Mater. Sci. Eng., A, 2005, rong class="a-plus-plus">395rong>, p 307-14 rnal" href="http://dx.doi.org/10.1016/j.msea.2004.12.048">CrossRef r> 6. C.A. Leon and R.A.L. Drew, Small Punch Testing for Assessing the Tensile Strength of Gradient Al/Ni-SiC Composites, / Mater. Lett., 2002, rong class="a-plus-plus">56rong>, p 812-16 rnal" href="http://dx.doi.org/10.1016/S0167-577X(02)00619-5">CrossRef r> 7. P. Wanjara, R.A.L. Drew, and S. Yue, Application of Small Specimen Testing Technique for Mechanical Property Assessment of Discontinuously Reinforced Composites, / Mater. Sci. Technol., 2006, rong class="a-plus-plus">22rong>, p 61-1 r> 8. L. Zhang, A.M. Elwazri, T. Zimmerly, and M. Brochu, Shear Punch Testing and Fracture Toughness of Bulk Nanostructured Silver, / Mater. Des., 2009, rong class="a-plus-plus">30rong>, p 1445-450 rnal" href="http://dx.doi.org/10.1016/j.matdes.2008.08.012">CrossRef r> 9. R.K. Guduru, P.Z. Wong, K.A. Darling, C.C. Koch, K.L. Murty, and R.O. Scattergood, Determination of Activation Volume in Nanocrystalline Cu Using the Shear Punch Test, / Adv. Eng. Mater., 2007, rong class="a-plus-plus">9rong>, p 855-59 rnal" href="http://dx.doi.org/10.1002/adem.200700181">CrossRef r> 10. S.M. Kurtz, C.W. Jewett, J.S. Bergstrom, J.R. Foulds, and A.A. Edidin, Miniature Specimen Shear Punch Test for UHMWPE Used in Total Joint Replacements, / Biomaterials, 2002, rong class="a-plus-plus">23rong>, p 1907-919 rnal" href="http://dx.doi.org/10.1016/S0142-9612(01)00316-7">CrossRef r> 11. B. Kondori and R. Mahmudi, Effect of Ca Additions on the Microstructure, Thermal Stability and Mechanical Properties of a Cast AM60 Magnesium Alloy, / Mater. Sci. Eng., A, 2010, rong class="a-plus-plus">527rong>, p 2014-021 rnal" href="http://dx.doi.org/10.1016/j.msea.2009.11.043">CrossRef r> 12. G. Nayyeri and R. Mahmudi, Effects of Ca Additions on the Microstructural Stability and Mechanical Properties of Mg-5%Sn Alloy, / Mater. Des., 2011, rong class="a-plus-plus">32rong>, p 1571-576 rnal" href="http://dx.doi.org/10.1016/j.matdes.2010.09.019">CrossRef r> 13. R. Alizadeh and R. Mahmudi, Evaluating High-Temperature Mechanical Behavior of Cast Mg-4Zn-xSb Magnesium Alloys by Shear Punch Testing, / Mater. Sci. Eng., A, 2010, rong class="a-plus-plus">527rong>, p 3975-983 rnal" href="http://dx.doi.org/10.1016/j.msea.2010.03.007">CrossRef r> 14. R. Mahmudi, F. Kabirian, and Z. Nematollahi, Microstructural Stability and High-Temperature Mechanical Properties of AZ91 and AZ91+2RE Magnesium Alloys, / Mater. Des., 2011, rong class="a-plus-plus">32rong>, p 2583-589 rnal" href="http://dx.doi.org/10.1016/j.matdes.2011.01.040">CrossRef r> 15. H. Tao, W. Tong, L.G. Hector, Jr., and P.D. Zavattieri, Uniaxial Tensile and Simple Shear Behavior of Resistance Spot-Welded Dual-Phase Steel Joints, / J. Mater. Eng. Perform., 2008, rong class="a-plus-plus">17rong>, p 517-34 rnal" href="http://dx.doi.org/10.1007/s11665-007-9170-8">CrossRef r> 16. R.K. Guduru, A.V. Nagasekhar, R.O. Scattergood, C.C. Koch, and K.L. Murty, Finite Element Analysis of a Shear Punch Test, / Metall. Mater. Trans. A, 2006, rong class="a-plus-plus">37rong>, p 1477-483 rnal" href="http://dx.doi.org/10.1007/s11661-006-0092-0">CrossRef r> 17. S.M. Masoudpanah, R. Mahmudi, and T.G. Langdon, Correlation Between Shear Punch and Tensile Measurements for an AZ31Mg Alloy Processed by Equal-Channel Angular Pressing, / Kovove Mater., 2011, rong class="a-plus-plus">49rong>, p 43-0 r> 18. G.E. Lucas, G.R. Odette, and J.W. Sheckherd, Shear Punch and Microhardness Tests for Strength and Ductility Measurements, / ASTM STP, 1986, rong class="a-plus-plus">888rong>, p 112-40 r> 19. G.E. Lucas, The Development of Small Specimen Mechanical Test Techniques, / J. Nucl. Mater., 1983, rong class="a-plus-plus">117rong>, p 327-39 rnal" href="http://dx.doi.org/10.1016/0022-3115(83)90041-7">CrossRef r> 20. M.L. Hamilton and M.B. Toloczko, Effect of Low Temperature Irradiation on the Mechanical Properties of Ternary V-Cr-Ti Alloys as Determined by Tensile Tests and Shear Punch Tests, / J. Nucl. Mater., 2000, rong class="a-plus-plus">283-87rong>, p 488-91 rnal" href="http://dx.doi.org/10.1016/S0022-3115(00)00227-0">CrossRef r> 21. M.L. Hamilton, M.B. Toloczko, and G.E. Lucas, Recent Progress in Shear Punch Testing, / Miniaturized Specimens for Testing of Irradiated Materials, H. Ullmaier and P. Jung, Ed., Forschungszentrum Julich GmbH, Julich, Germany, 1995, p 46-8 r> 22. G.L. Hankin, M.B. Toloczko, M.L. Hamilton, and R.G. Faulkner, Validation of the Shear Punch-Tensile Correlation Technique Using Irradiated Materials, / J. Nucl. Mater., 1998, rong class="a-plus-plus">258-63rong>, p 1651-656 rnal" href="http://dx.doi.org/10.1016/S0022-3115(98)00203-7">CrossRef r>
• 作者单位：R. Mahmudi (1) r> M. Sadeghi (1) r>r>1. School of Metallurgical and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran r>
• ISSN：1544-1024

文摘

The deformation behavior of AISI 1015 low-carbon steel, and AISI 304 stainless steel sheets was investigated by uniaxial tension and the shear punch test (SPT). Both materials were cold rolled to an 80% thickness reduction and subsequently annealed in the temperature range 25-850?°C to produce a wide range of yield and ultimate strength levels. The correlations between shear punch and tensile yield and ultimate stresses were established empirically. Different linear relationships having different slopes and intercepts were found for the low-carbon and stainless steel sheets, and the possible parameters affecting the correlation were discussed. It was shown that, within limits, yield and tensile strength of thin steel sheets can be predicted from the shear data obtained by the easy-to-perform SPT.