Characteristics and numerical runout modelling of a catastrophic rock avalanche triggered by the Wenchuan earthquake in the Wenjia valley, Mianzhu, Sichuan, China

详细信息    查看全文

• 作者：Aiguo Xing ; Xiaoyi Yuan ; Qiang Xu ; Qihua Zhao ; Heqing Huang ; Qiangong Cheng
• 关键词：Rock avalanche ; Post ; failure behaviour ; Numerical modelling ; DAN3D model ; Wenchuan earthquake
• 刊名：Landslides
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：14
• 期：1
• 页码：83-98
• 全文大小：
• 刊物类别：Earth and Environmental Science
• 刊物主题：Natural Hazards; Geography, general; Agriculture; Civil Engineering;
• 出版者：Springer Berlin Heidelberg
• ISSN：1612-5118
• 卷排序：14

文摘

The 2008 Wenchuan earthquake triggered more than 100 rock avalanches with volumes greater than 10 million cubic metres. The rock avalanche with the longest runout amongst these destructive landslides occurred in the Wenjia valley, Mianzhu, Sichuan, China. The landslide involved the failure of about 27.5 million cubic metres of sandstone from the source area. The displaced material travelled about 4,170 m with an elevation descent of about 1,360 m, equivalent to a fahrböschung of 16.9° and covered an area of 1.5 million square metres, with the final deposited volume of approximately 49 million cubic metres. The catastrophic event destroyed the village of Yanjing, killed 48 people and buried some houses at the mouth of the Wenjia valley. On the basis of a detailed field investigation, we introduce basic characteristics of the rock avalanche and find that the rock avalanche resulted in two run-ups and a superelevation along the runout path, and downslope enlargement due to the entrainment of path materials. A numerical model (DAN3D) is used to simulate the post-failure behaviour of the rock avalanche. By means of trial and error, a combination of the frictional model and Voellmy model is found to provide the best performance in simulating this rock avalanche. The simulation results reveal that the rock avalanche had a duration of about 240 s and an average velocity of 17.4 m/s.