Large-scale dimensional metrology (LSDM): from tapes and theodolites to multi-sensor systems

详细信息    查看全文

• 作者：Fiorenzo Franceschini (1)
  Maurizio Galetto (1)
  Domenico Maisano (1)
  Luca Mastrogiacomo (1)
  
• 关键词：Coordinate measurement systems ; Large ; scale dimensional metrology ; Large ; volume dimensional metrology ; Multi ; sensor systems
• 刊名：International Journal of Precision Engineering and Manufacturing
• 出版年：2014
• 出版时间：August 2014
• 年：2014
• 卷：15
• 期：8
• 页码：1739-1758
• 全文大小：924 KB
• 参考文献：1. Purttock, M. J., “Large-Scale Metrology,-CIRP Annals, Vol. 21, No. 2, pp. 351-56 1978.
  2. Swyt, D. A., “Length and Dimensional Measurements at NIST,-Journal of Research-National Institute of Standards and Technology, Vol. 106, No. 1, pp. 1-4, 2001.
  3. Estler, W. T., Edmundson, K. L., Peggs, G. N., and Parker, D. H., “Large-Scale Metrology-an Update,-CIRP Annals-Manufacturing Technology, Vol. 51, No. 2, pp. 587-09, 2002.
  4. Weckenmann, A., Estler, T., Peggs, G., and McMurtry, D., “Probing Systems in Dimensional Metrology,-CIRP Annals-Manufacturing Technology, Vol. 53, No. 2, pp. 657-84, 2004.
  5. Hughes, B., “Large Scale Metrology at NPL,-Proc. of the Large Scale Metrology Workshop, 2006.
  6. Cuypers, W., Van Gestel, N., Voet, A., Kruth, J. P., Mingneau, J., and Bleys, P., “Optical Measurement Techniques for Mobile and Large-Scale Dimensional Metrology,-Optics and Lasers in Engineering, Vol. 47, No. 3-, pp. 292-00, 2009.
  7. Cuypers, W., Van Gestel, N., Voet, A., Kruth, J. P., Mingneau, J., and Bleys, P., “Optical Measurement Techniques for Mobile and Large-Scale Dimensional Metrology,-Optics and Lasers in Engineering, Vol. 47, No. 3, pp. 292-00, 2009.
  8. Peggs, G., Maropoulos, P. G., Hughes, E., Forbes, A., Robson, S., Ziebart, M., and Muralikrishnan, B., “Recent Developments in Large-Scale Dimensional Metrology,-Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 223, No. 6, pp. 571-95, 2009.
  9. Franceschini, F., Galetto, M., Maisano, D., Mastrogiacomo, L., and Pralio, B., “Distributed Large-Scale Dimensional Metrology,-Springer, 2011.
  10. Burner, A. W., Radeztsky, R. H., and Liu, T., “Videometric Applications in Wind Tunnels,-Proc. of SPIE, Vol. 3174, pp. 234-47, 1997.
  11. Kugel, H. W., Loesser, D., Roquemore, A. L., Menon, M. M., and Barry, R. E., “Precision Metrology of NSTX Surfaces using Coherent Laser Radar Ranging,-Review of Scientific Instruments, Vol. 72, No. 1, pp. 533-36, 2001.
  12. Jones, T. W. and Pappa, R. S., “Dot Projection Photogrammetric Technique for Shape Measurements of Aerospace Test Articles,-Proc. of 40th AIAA Aplied Aerodynamics Conference, AIAA 2002-0532, 2002.
  13. Jones, T. W., Dorrington, A. A., Brittman, P. L., and Danehy, P. M., “Laser Induced Fluorescence for Photogrammetric Measurement of Transparent or Reflective Aerospace Structures,-Proc. of 49th Annual International Instrumentation Symposium, 2003.
  14. Scopigno, R., Cignoni, P., Callieri, M., Ganovelli, F., Impoco, G., et al., “Using Optically Scanned 3D Data in the Restoration of Michelangelo's David,-Proc. of SPIE, Vol. 5146, pp. 44-3, 2003.
  15. Balsamo, A., Chimienti, A., Desogus, S., Grattoni, P., Meda, A., et al., “A Portable Stereovision System for Cultural Heritage Monitoring,-CIRP Annals-Manufacturing Technology, Vol. 54, No. 1, pp. 499-02, 2005.
  16. Hand, S. D., Clark, J. F. F., Mongon, W. J., and Schindelholz, E., “Measurement of the USS Monitor Propeller using Structured Light and Coherent Laser Radar Scanning Technologies,-Proc. of the CMSC 2005 Coordinate Systems Measurement Conference, 2005.
  17. Reichold, A., Dawson, M., Green, J., Han, Y., Jones, M., et al., “The LiCAS-RTRS-A Rapid and Cost Efficient Survey System for the ILC,-Proc. of the 9th International Workshop on Accelerator Alignment, 2006.
  18. Cai, B., Guo, Y., Jamshidi, J., and Maropoulos, P., “Measurability Analysis Of Large Volume Metrology Process Model For Early Design,-Proc. of 5th International Conference on Digital Enterprise Technology, 2008.
  19. Maropoulos, P. G., Guo, Y., Jamshidi, J., and Cai, B., “Large Volume Metrology Process Models: A Framework for Integrating Measurement with Assembly Planning,-CIRP Annals-Manufacturing Technology, Vol. 57, No. 1, pp. 477-80, 2008.
  20. Jamshidi, J., Kayani, A., Iravani, P., Maropoulos, P. G., and Summers, M., “Manufacturing and Assembly Automation by Integrated Metrology Systems for Aircraft Wing Fabrication,-Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 224, No. 1, pp. 25-6, 2010.
  21. Cuesta, E., álvarez, B. J., Sánchez-Lasheras, F., Fernández, R. L., and Gonzalez-Madruga, D., “Feasibility Evaluation of Photogrammetry versus Coordinate Measuring Arms for the Assembly of Welded Structures,-Advanced Materials Research, Vol. 498, pp. 103-08, 2012.
  22. Flynn, R., “Synthesizing Metrology Technologies to Reduce Engineering Time for Large CNC Machine Compensation,-SAE International Journal of Materials and Manufacturing, Vol. 5, No. 1, pp. 49-9, 2011.
  23. Goch, G., Knapp, W., and H?rtig, F., “Precision Engineering for Wind Energy Systems,-CIRP Annals-Manufacturing Technology, Vol. 61, No. 2, pp. 611-34, 2012.
  24. Liu, T., Burner, A. W., Jones, T. W., and Barrows, D. A., “Photogrammetric Techniques for Aerospace Applications,-Progress in Aerospace Sciences, Vol. 54, pp. 1-8, 2012.
  25. Nüchter, A., Surmann, H., Lingemann, K., and Hertzberg, J., “Consistent 3D Model Construction with Autonomous Mobile Robots,-Advances in Artificial Intelligence, Vol. 2821, pp. 550-64, 2003.
  26. Galetto, M., Mastrogiacomo, L., Pralio, B., and Spagnolo, C., “Indoor Environmental Mapping by Means of Autonomous Guided Agents,-Proc. of ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, Paper No. ESDA2010-25224, pp. 759-67, 2010.
  27. Santolaria, J., Conte, J., and Ginés, M., “Laser Tracker-Based Kinematic Parameter Calibration of Industrial Robots by Improved CPA Method and Active Retroreflector,-The International Journal of Advanced Manufacturing Technology, Vol. 66, No. 9-2, pp. 2087-106, 2013.
  28. Taylor, J., Beraldin, J.-A., Godin, G., Cournoyer, L., Baribeau, R., et al., “NRC 3D Imaging Technology for Museum and Heritage Applications,-The Journal of Visualization and Computer Animation, Vol. 14, No. 3, pp. 121-38, 2003.
  29. Blais, F. and Beraldin, J.-A., “Recent Developments in 3D Multi-Modal Laser Imaging Applied to Cultural Heritage,-Machine Vision and Applications, Vol. 17, No. 6, pp. 395-09, 2006.
  30. Guidi, G., Frischer, B., Russo, M., Spinetti, A., Carosso, L., and Micoli, L. L., “Three-Dimensional Acquisition of Large and Detailed Cultural Heritage Objects,-Machine Vision and Applications, Vol. 17, No. 6, pp. 349-60, 2006.
  31. Atwater, F., Hand, D., Hardin, H., Edwards, W., and Chamsine, G., “The Measurement and Modeling of a World War I Mark IV Tank Using CLR and CCD Camera/Line Scanning Systems in an Outside Environment,-Journal of the CMSC, Vol. 2, No. 2, pp. 4-0, 2007.
  32. Stiros, S. C., “Levelling in Antiquity: Instrumentation, Techniques and Accuracies,-Survey Review, Vol. 44, No. 324, pp. 45-2, 2012.
  33. Norman, A. R., Sch?nberg, A., Gorlach, I. A., and Schmitt, R., “Validation of iGPS as an External Measurement System for Cooperative Robot Positioning,-The International Journal of Advanced Manufacturing Technology, Vol. 64, No. 1-, pp. 427-46, 2013.
  34. Saadat, M. and Cretin, C., “Dimensional Variations during Airbus Wing Assembly,-Assembly Automation, Vol. 22, No. 3, pp. 270-76, 2002.
  35. Saadat, M. and Cretin, L., “Measurement Systems for Large Aerospace Components,-Sensor Review, Vol. 22, No. 3, pp. 199-06, 2002.
  36. Maropoulos, P. G., Zhang, D., Rolt, S., Chapman, P., and Rogers, B., “Integration of Measurement Planning with Aggregate Product Modelling for Spacecraft Design and Assembly,-Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 220, No. 10, pp. 1687-695, 2006.
  37. Maropoulos, P. G., Zhang, D., Chapman, P., Bramall, D. G., and Rogers, B. C., “Key Digital Enterprise Technology Methods for Large Volume Metrology and Assembly Integration,-International Journal of Production Research, Vol. 45, No. 7, pp. 1539-559, 2007.
  38. Muelaner, J. E. and Maropoulos, P., “Large Scale Metrology in Aerospace Assembly,-Proc. of 5th International Conference on Digital Enterprise Technology, 2008.
  39. Kim, K., Lee, S., Kim, K., Lee, K.-Y., Heo, S., et al., “Development of the End-Effector Measurement System for a 6-Axis Welding Robot,-Int. J. Precis. Eng. Manuf., Vol. 11, No. 4, pp. 519-26, 2010.
  40. Mbarek, T., Meissner, A., and Biyiklioglu, N., “Positioning System for the Aircraft Structural Assembly,-SAE International Journal of Aerospace, Vol. 4, No. 2, pp. 1038-047, 2011.
  41. Liu, S., Luo, Z., Tan, G., Ye, N., and Zhang, L., -D Measurement and Quality Evaluation for Complex Aircraft Assemblies,-Acta Aeronautica ET Astronautica Sinica, No. 2, pp. 409-18, 2013.
  42. Savio, E., De Chiffre, L., and Schmitt, R., “Metrology of Freeform Shaped Parts,-CIRP Annals-Manufacturing Technology, Vol. 56, No. 2, pp. 810-35, 2007.
  43. Huber, D. F. and Hebert, M., “Fully Automatic Registration of Multiple 3D Data Sets,-Image and Vision Computing, Vol. 21, No. 7, pp. 637-50, 2003.
  44. Mitchell, J. P., Spence, A. D., Hoang, M., and Free, A., “Sensor Fusion of Laser Trackers for use in Large-Scale Precision Metrology,-Proc. of SPIE, Intelligent Manufacturing, Vol. 5263, pp. 57-5, 2004.
  45. Zexiao, X., Jianguo, W., and Qiumei, Z., “Complete 3D Measurement in Reverse Engineering using a Multi-Probe System,-International Journal of Machine Tools and Manufacture, Vol. 45, No. 12, pp. 1474-486, 2005.
  46. Jamshidi, J., Owen, G. W., and Mileham, A. R., “A New Data Fusion Method for Scanned Models,-Journal of Computing and Information Science in Engineering, Vol. 6, No. 4, pp. 340-48, 2006.
  47. Weckenmann, A., Jiang, X., Sommer, K.-D., Neuschaefer-Rube, U., Seewig, J., et al., “Multisensor Data Fusion in Dimensional Metrology,-CIRP Annals-Manufacturing Technology, Vol. 58, No. 2, pp. 701-21, 2009.
  48. Forbes, A. B., “Weighting Observations from Multi-Sensor Coordinate Measuring Systems,-Measurement Science and Technology, Vol. 23, No. 2, Paper No. 025004, 2012.
  49. Wendt, K., Franke, M., and H?rtig, F., “Measuring Large 3D Structures using Four Portable Tracking Laser Interferometers,-Measurement, Vol. 45, No. 10, pp. 2339-345, 2012.
  50. Senin, N., Colosimo, B. M., and Pacella, M., “Point Set Augmentation through Fitting for Enhanced ICP Registration of Point Clouds in Multisensor Coordinate Metrology,-Robotics and Computer-Integrated Manufacturing, Vol. 29, No. 1, pp. 39-2, 2013.
  51. White, D. A., “Coherent laser Radar: True Noncontact 3-D Measurement Has Arrived- This New 3-D Measurement Technology Eliminates the Need for Photogrammetry Dots, Laser Tracker SMRs or Hand-Held Probes,-Quality Digest, Vol. 19, pp. 35-8, 1999.
  52. Huntley, J. M., “Optical Shape Measurement Technology: Past, Present, and Future,-Proc. of Symposium on Applied Photonics, pp. 162-73, 2000.
  53. Chen, F., Brown, G. M., and Song, M., “Overview of Three-Dimensional Shape Measurement using Optical Methods,-Optical Engineering, Vol. 39, No. 1, pp. 10-2, 2000.
  54. Chow, J., Xu, T., Lee, S.-M., and Kengkool, K., “Development of an Integrated Laser-based Reverse Engineering and Machining System,-The International Journal of Advanced Manufacturing Technology, Vol. 19, No. 3, pp. 186-91, 2002.
  55. Gordon, S., Lichti, D. D., Stewart, M. P., and Tsakiri, M., “Metric Performance of a High-Resolution Laser Scanner,-Proc. of APIE, Videometrics and Optical Methods for 3D Shape Measurement, Vol. 4309, pp. 174-84, 2001.
  56. Schwenke, H., Neuschaefer-Rube, U., Pfeifer, T., and Kunzmann, H., “Optical Methods for Dimensional Metrology in Production Engineering,-CIRP Annals-Manufacturing Technology, Vol. 51, No. 2, pp. 685-99, 2002.
  57. Ribo, M. and Brandner, M., “State of the Art on Vision-based Structured Light Systems for 3D Measurements,-Proc. of International Workshop on Robotic Sensors: Robotic and Sensor Environments, pp. 2-, 2005.
  58. Fan, Q., Chen, D. W., and Xi, J. T., “A High Precision 3D Laser Scanner System and Its Application,-Journal of Shanghai Jiaotong University, Col. 40, No. 2, pp. 227-30, 2006.
  59. Luhmann, T., Robson, S., Kyle, S., and Harley, I., “Close Range Photogrammetry: Principles, Techniques and Applications,-Wiley, 2006.
  60. Fryer, J. G., Mitchell, H. L., and Chandler, J. H., “Applications of 3D Measurement from Images,-Whittles Publishing, 2007.
  61. Kyle, S., “Optically Jointed Probing Systems for Large Volume Coordinate Metrology,-Journal of the CMSC, Vol. 2, No. 1, pp. 26-2, 2007.
  62. Blanckaert, T. S. P., Metris, N., and Metris, L. B., “Frequency Modulated Coherent Laser Radar Technology,-Proc. of 3rd Workshop on Optical Measurement Techniques, pp. 386-91, 2007.
  63. Galetto, M., Mastrogiacomo, L., and Pralio, B., “A Wireless Sensor Network-based Approach to Large-Scale Dimensional Metrology,-International Journal of Computer Integrated Manufacturing, Vol. 23, No. 12, pp. 1082-094, 2010.
  64. Galetto, M., Mastrogiacomo, L., and Pralio, B., “The Mobile Spatial Coordinate Measuring System II (MScMS-II): System Description and Preliminary Assessment of the Measurement Uncertainty,-International Journal of Metrology and Quality Engineering, Vol. 1, No. 2, pp. 111-19, 2010.
  65. Galetto, M., Mastrogiacomo, L., and Pralio, B., “MScMS-II: an Innovative IR-based Indoor Coordinate Measuring System for Large-Scale Metrology Applications,-The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 1-, pp. 291-02, 2011.
  66. Questel, “Orbit,-http://www.questel.com/prodsandservices/Orbit.htm.html (Accessed 2 JUN 2014)
  67. Franceschini, F. and Maisano, D., “The Evolution of Large-Scale Dimensional Metrology from the Perspective of Scientific Articles and Patents,-The International Journal of Advanced Manufacturing Technology, Vol. 70, No. 5-, pp. 887-09, 2014.
  68. Hocken, R. J. and Lau, K. C., “Three and Five Axis Laser Tracking Systems,-US Patent, No. 4714339A, 1987.
  69. API Automated Precision Inc., http://www.apisensor.com/ (Accessed 18 JUL 2014).
  70. FARO, http://www.faro.com/en-us/home (Accessed 18 JUL 2014).
  71. Leica Geosystems, http://www.leica-geosystems.com/en/index.htm (Accessed 18 JUL 2014).
  72. Nikon Metrology NV, http://www.nikonmetrology.com/en_EU/ (Accessed 18 JUL 2014).
  73. Franceschini, F., Maisano, D., and Mastrogiacomo, L., “Mobile Spatial Coordinate Measuring System (MScMS) and CMMs: a Structured Comparison,-The International Journal of Advanced Manufacturing Technology, Vol. 42, No. 11-2, pp. 1089-102, 2009.
  74. Hexagon, http://www.hexagon.com/en/index.htm (Accessed 18 JUL 2014).
  75. Konica Minolta, http://www.konicaminolta.com/ (Accessed 18 JUL 2014).
  76. Muelaner, J. E., Wang, Z., Jamshidi, J., Maropoulos, P., Mileham, A. R., et al., “iGPS-An Initial Assessment of Technical and Deployment Capability,-Proc. of 3rd International Conference on Manufacturing Engineering, pp. 805-10, 2008.
  77. Maisano, D. A., Jamshidi, J., Franceschini, F., Maropoulos, P. G., Mastrogiacomo, L., et al., “A Comparison of Two Distributed Large-Volume Measurement Systems: the Mobile Spatial Co-Ordinate Measuring System and the Indoor Global Positioning System,-Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 223, No. 5, pp. 511-21, 2009.
  78. Schmitt, R., Nisch, S., Schonberg, A., Demeester, F., and Renders, S., “Performance Evaluation of iGPS for Industrial Applications,-Proc. of International Conference on Indoor Positioning and Indoor Navigation (IPIN), pp. 1-, 2010.
  79. Du, F. Z., Chen, Z. H., and Tang, X. Q., “Precision Analysis of iGPS Measurement Field and its Application,-Acta Aeronaut Astronaut Sinica, Vol. 33, No. 9, pp. 101-09, 2012.
  80. Mermelstein, M. S., Feldkhun, D. L., and Shirley, L. G., “Video-Rate Surface Profiling with Acousto-Optic Accordion Fringe Interferometry,-Optical Engineering, Vol. 39, No. 1, pp. 106-13, 2000.
  81. Franceschini, F., Galetto, M., Maisano, D., and Mastrogiacomo, L., “Mobile Spatial Coordinate Measuring System (MScMS)-Introduction to the System,-International Journal of Production Research, Vol. 47, No. 14, pp. 3867-889, 2009.
  82. Franceschini, F., Maisano, D., Mastrogiacomo, L., and Pralio, B., “Ultrasound Transducers for Large-Scale Metrology: a Performance Analysis for their use by the MScMS,-IEEE Transactions on Instrumentation and Measurement, Vol. 59, No. 1, pp. 110-21, 2010.
  83. Aebischer, B. and Braunecker, B., “Total Station for Measuring the 3-D Position and Orientation of a Rigid Body,-Proc. of the 6th Conference on Optical 3-D Measurement Techniques, Vol. 1, pp. 199-04, 2003.
  84. Beraldin, J. A., “Integration of Laser Scanning and Close-Range Photogrammetry-the Last Decade and Beyond,-Proc. of International Society for Photogrammetry and Remote Sensing, Vol. 7, pp. 972-83, 2004.
  85. Orozco, B. V. and Gardunyo, V. G., “Structured Laser Light and Coordinate Measuring Systems Integration for 3D Metrology,-Proc. of SPIE, 8th International Symposium on Laser Metrology, Vol. 5776, pp. 618-29, 2005.
  86. González-Jorge, H., Riveiro, B., Arias, P., and Armesto, J., “Photogrammetry and Laser Scanner Technology Applied to Length Measurements in Car Testing Laboratories,-Measurement, Vol. 45, No. 3, pp. 354-63, 2012.
  87. Takatsuji, T., Goto, M., Kurosawa, T., Tanimura, Y., and Koseki, Y., “The First Measurement of a Three-Dimensional Coordinate by use of a Laser Tracking Interferometer System based on Trilateration,-Measurement Science and Technology, Vol. 9, No. 1, pp. 38-1, 1998.
  88. Hughes, E. B., Wilson, A., and Peggs, G. N., “Design of a High-Accuracy CMM based on Multi-Lateration Techniques,-Annals of the CIRP, Vol. 49, No. 1, pp. 391-94, 2000.
  89. Wendt, K., Franke, M., and H?rtig, F., “Mobile Multi-Lateration Measuring System for High Accurate and Traceable 3D Measurements of Large Objects,-Proc. of the 10th ISMQC Paper, No. 25, pp. 1-, 2010.
  90. Muelaner, J. E., Cai, B., and Maropoulos, P. G., “Large-Volume Metrology Instrument Selection and Measurability Analysis,-Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 224, No. 6, pp. 853-68, 2010.
  91. An eye on global research, http://www.elsevier.com/online-tools/scopus (Accessed 18 JUL 2014).
  92. Bar-Ilan, J., “Citations to the “Introduction to Informetrics-Indexed by WOS, Scopus and Google Scholar,-Scientometrics, Vol. 82, No. 3, pp. 495-06, 2010.
  93. Labbé, C., “Ike Antkare One of the Great Stars in the Scientific Firmament,-International Society for Scientometrics and Informetrics Newsletter, Vol. 6, No. 2, pp. 48-2, 2010.
  94. Van Looy, B., Callaert, J., and Debackere, K., “Publication and Patent Behavior of Academic Researchers: Conflicting, Reinforcing or Merely Co-Existing?,-Research Policy, Vol. 35, No. 4, pp. 596-08, 2006.
  95. Breschi, S. and Catalini, C., “Tracing the Links Between Science and Technology: An Exploratory Analysis of Scientists-and Inventors-Networks,-Research Policy, Vol. 39, No. 1, pp. 14-6, 2010.
  96. Jun, S. and Lee, S. J., “Emerging Technology Forecasting Using New Patent Information Analysis,-International Journal of Software Engineering & Its Applications, Vol. 6, No. 3, pp. 107-16, 2012.
  97. Rogers, E. M., “Diffusion of Innovations,-Free Press, 5th Ed., 2013.
  98. Cheng, Y. H., Kuan, F. Y., Chuang, S. C., and Ken, Y., “Profitability Decided by Patent Quality? An Empirical Study of the US Semiconductor Industry,-Scientometrics, Vol. 82, No. 1, pp. 175-83, 2010.
  99. Czarnitzki, D., Gl?nzel, W., and Hussinger, K., “Patent and Publication Activities of German Professors: An Empirical Assessment of their Co-Activity,-Research Evaluation, Vol. 16, No. 4, pp. 311-19, 2007.
  100. Franceschini, F., Galetto, M., Maisano, D., and Mastrogiacomo, L., “A Review of Localization Algorithms for Distributed Wireless Sensor Networks in manufacturing,-International Journal of Computer Integrated Manufacturing, Vol. 22, No. 7, pp. 698-16, 2009.
  101. Hoffman, B., Wellenhof, H. L., and Collins, J., “GPS-Theory and Practice,-Springer-Wien, 2001.
  102. JCGM 200, “The International Vocabulary of Metrology-Basic and General Concepts and Associated Terms (VIM),-International Organization for Standardization, 2008.
  103. Mavromihales, M., Mason, J., and Weston, W., “A Case of Reverse Engineering for the Manufacture of Wide Chord Fan Blades (WCFB) used in Rolls Royce Aero Engines,-Journal of Materials Processing Technology, Vol. 134, No. 3, pp. 279-86, 2003.
  104. Mayoud, M., “Large Scale Metrology for Research and Industry-Application to Particle Accelerators and Recent Developments,-FIG Working Week, 2004.
  105. Yang, D. and Cheng, J., “Application of Photogrammetric Technique to Astronomical Telescope Measurement and Control,-Proc. of SPIE, Astronomical Structures and Mechanisms Technology, Vol. 5495, pp. 677-84, 2004..
  106. Martin, D., “Instrumentation and Calibration at the ESRF,-Proc. of the 7th International Workshop on Accelerator Alignment, 2002.
  107. Samper, D., Santolaria, J., Brosed, F. J., and Aguilar, J. J., “A Stereo-Vision System to Automate the Manufacture of a Semitrailer Chassis,-The International Journal of Advanced Manufacturing Technology, Vol. 67, No. 9-2, pp. 2283-292, 2013.
  108. Sánchez-Lasheras, F., Fernández, R., Cuesta, E., álvarez, B., Martínez, S., Marcos, M., and Salguero, J., “Study of the Technical Feasibility of Photogrammetry and Coordinated Measuring Arms for the Inspection of Welded Structures,-Proc. of AIP Conference Proceedings-American Institute of Physics, Vol. 1431, pp. 311-18, 2012.
  109. Luhmann, T. and WENDT, K., “Recommendations for an Acceptance and Verification Test of Optical 3-D Measurement Systems,-International Archives of Photogrammetry and Remote Sensing, Vol. 33, No. 5, pp. 493-00, 2000.
  110. Muralikrishnan, B., Blackburn, C., and Sawyer, D., “Laser Tracker Testing at NIST using the ASME B89. 4. 19 Standard,-The Journal of the CMSC, Vol. 2, No. 2, pp. 11-5, 2007.
  111. Huang, Z., Ni, J., and Shih, A. J., “Quantitative Evaluation of Powder Spray Effects on Stereovision Measurements,-Measurement Science and Technology, Vol. 19, No. 2, Paper No. 025502, 2008.
  112. Ma, G., Zhao, B., and Fan, Y., “Non-Diffracting Beam based Probe Technology for Measuring Coordinates of Hidden Parts,-Optics and Lasers in Engineering, Vol. 51, No. 5, pp. 585-91, 2013.
  113. Pappa, R. S., Lassiter, J. O., and Ross, B. P., “Structural Dynamics Experimental Activities in Ultra-Lightweight and Inflatable Space Structures,-NASA Langley Technical Report Server, Document ID: A01-25063, 2001.
  114. Shortis, M. R., Robson, S., Pappa, R. S., Jones, T. W., and Goad, W. K., “Characterisation and Tracking of Membrane Surfaces at NASA Langley Research Center,-International Archives of Photogrammetry Remote Sensing and Spatial Information Sciences, Vol. 34, No. 5, pp. 90-4, 2002.
  115. Sadleir, R. J., Owens, R. A., and Hartmann, P. E., “System for Routine Surface Anthropometry using Reprojection Registration,-Measurement Science and Technology, Vol. 14, No. 11, pp. 1912-926, 2003.
  116. Shortis, M. R., Robson, S., Jones, T. W., and Lunsford, C. B., “Parachute Model Validation using Image Sequences,-Proc. of 8th Conference on Optical 3-D Measurement Techniques, pp. 72-9, 2007.
  117. Brumbi, D., “Measuring Process and Storage Tank Level with Radar Technology,-Proc. of Record of the IEEE 1995 International Radar Conference, pp. 256-60, 1995.
  118. Otto, J., “Radar Applications in Level Measurement, Distance Measurement and Nondestructive Material Testing,-Proc. of 27th European Microwave Conference, Vol. 2, pp. 1113-121, 1997.
  119. Sen, S., Kenworthy A., “Flow Metering Techniques for Process Measurement and Control- Journal of Flow Engineering and Technology, Vol. 3, No. 6, pp. 73-5, 2014.
  120. Qingfeng, W., Qican, Z., and Yuankun, L., “Three-Dimensional Measurement of Object in Water by Tracking Phase Value,-Acta Optica Sinica, Vol. 29, No. 6, pp. 1570-576, 2009.
  121. Xie, Z., Li, X., Xin, S., and Xu, S., “Underwater Line Structured-Light Self-Scan Three-Dimension Measuring Technology,-Chinese Journal of Lasers, Vol. 37, No. 8, 2010.
  122. Schneider, O., “Requirements for Positioning and Navigation in Underground Constructions,-Proc. of International Conference on Indoor Positioning and Indoor Navigation (IPIN), pp. 1-, 2010.
  123. Pompili, D., Melodia, T., and Akyildiz, I. F., “Deployment analysis in Underwater Acoustic Wireless Sensor Networks,-Proc. of the 1st ACM international workshop on Underwater networks, pp. 48-5, 2006.
  124. Estler, W. T., Sawyer, D. S., Borchardt, B. R., and Phillips, S. D., “Large-Scale Metrology Instrument Performance Evaluations at NIST,-Journal of the CMSC, Vol. 1, No. 2, pp. 27-2, 2006.
  125. Forbes, A. B., “Efficient Algorithms for Structured Self-Calibration Problems,-Proc. of 4th Algorithms for Approximation Conference, pp. 146-53, 2002.
  126. Franceschini, F., Galetto, M., Maisano, D., and Mastrogiacomo, L., “On-Line Diagnostics in the Mobile Spatial Coordinate Measuring System (MScMS),-Precision Engineering, Vol. 33, No. 4, pp. 408-17, 2009.
  127. Galetto, M. and Pralio, B., “Optimal Sensor Positioning for Large Scale Metrology Applications,-Precision Engineering, Vol. 34, No. 3, pp. 563-77, 2010.
  128. Ni, A. J.and Zheng, L. Y., “Optimal Configuration Method for Largescale Measurement Systems Based on Form Error Uncertainty,-Acta Metrologica Sinica, Vol. 32, No. 4, pp. 289-95, 2011.
  129. Yang, L. H., Wang, Y., Zhu, J. G., and Yang, X. Y., “Distributed Optical Sensor Network with Self-Monitoring Mechanism for Accurate Indoor Location and Coordinate Measurement,-Applied Mechanics and Materials, Vol. 190-91, pp. 972-76, 2012.
  130. Galetto, M. and Mastrogiacomo, L., “Corrective Algorithms for Measurement Improvement in MScMS-II (Mobile Spatial Coordinate Measurement System),-Precision Engineering, Vol. 37, No. 1, pp. 228-34, 2013.
  131. Gholami, M., Cai, N., and Brennan, R., “An Artificial Neural Network Approach to the Problem of Wireless Sensors Network Localization,-Robotics and Computer-Integrated Manufacturing, Vol. 29, No. 1, pp. 96-09, 2013.
  132. Maropoulos, P. G., “Digital Enterprise Technology-Defining Perspectives and Research Priorities,-International Journal of Computer Integrated Manufacturing, Vol. 16, No. 7-, pp. 467-78, 2003.
  133. Maropoulos, P. G., Rogers, B. C., Chapman, P., McKay, K. R., and Bramall, D. G., “A Novel Digital Enterprise Technology Framework for the Distributed Development and Validation of Complex Products,-CIRP Annals-Manufacturing Technology, Vol. 52, No. 1, pp. 389-92, 2003.
  134. Maropoulos, P. G. and Ceglarek, D., “Design Verification and Validation in Product Lifecycle,-CIRP Annals-Manufacturing Technology, Vol. 59, No. 2, pp. 740-59, 2010.
  135. Patias, P. and Peipe, J., “Photogrammetry and CAD/CAM in Culture and Industry-an Ever Changing Paradigm,-International Archives of Photogrammetry and Remote Sensing, Vol. 33, No. B5, pp. 599-03, 2000.
  136. VDI Themenradar Automobil, “VDI-Standard: VDI/VDE 2617 Blatt 2.3 Accuracy of Coordinate Measuring Machines- Characteristics and Checking of Characteristics- Acceptance and Reverification Tests for Coordinate Measuring Machines of Large Dimensions,-2005.
  137. ASME B89.7.5, “Metrological Traceability of Dimensional Measurements to the SI Unit of Length (An ASME Technical Report),-2006.
  138. ISO 10360-2, “Geometrical Product Specifications (GPS)- Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM)- Part 2: CMMs used for Measuring Linear Dimensions,-2009.
  139. ISO/TS 15530-4, “Geometrical Product Specifications (GPS)- Coordinate Measuring Machines (CMM): Technique for Determining the Uncertainty of Measurement- Part 4: Evaluating Task-Specific Measurement Uncertainty using Simulation,-2008.
  140. ISO 15530-3, “Geometrical Product Specifications (GPS)- Coordinate Measuring Machines (CMM): Technique for Determining the Uncertainty of Measurement- Part 3: Use of Calibrated Workpieces or Measurement Standards,-2011.
  141. VDI/VDE Guideline 2634 Part 1, “Optical 3-D Measuring Systems and Imaging Systems with Point-by-Point Probing,-2002.
  142. ASME B89.4.19, “Performance Evaluation of Laser-Based Spherical Coordinate Measurement Systems,-2006.
  143. Cross, N. R., Dotson, J. R., Flack, D. R., Peggs, G. N., Cox, M. G., et al., “A Large Reference Artefact for CMM Verification,-National Physical Laboratory. Great Britain, Centre for Length Metrology, 1998.
  144. Brown, N., Veugen, R., van der Beek, G. J., and Hugers, R. F., “Recent Work at NML to Establish Traceability for Survey Electronic Distance Measurement (EDM),-Proc. of SPIE's 48th Annual Meeting Optical Science and Technology, pp. 381-90, 2003.
  145. Cox, M. G., Forbes, A. B., Fossati, P. M., Harris, P. M., and Smith, I. M., “Techniques for the Efficient Solution of Large Scale Calibration Problems,-National Physical Laboratory, Centre for Mathematics and Scientific Computing, 2003.
  146. Canning, J. S. Ziegert, J. C., and Schmitz, T. L., “Uncertainty of Spatial Coordinate Measurements Using Trilateration,-Technical Papers-Society of Manufacturing Engineers, Vol. 33, 2005.
  147. Forbes, A. B., “Structured Nonlinear Gauss-Markov Problems,-Algorithms for Approximation V, in: Approximation Algorithms for Complex Systems, Georgoulis, E. GH., Iske, A., and Levesley, J., (Ed.), Springer, pp. 167-86, 2007.
  148. Forbes, A. B., “Surface Fitting Taking into Account Uncertainty Structure in Coordinate Data,-Measurement Science and Technology, Vol. 17, No. 3, pp. 553-58, 2006.
  149. Forbes, A. B., “Uncertainty Evaluation Associated with Fitting Geometric Surfaces to Coordinate Data,-Metrologia, Vol. 43, No. 4, pp. S282–S290, 2006.
  150. JCGM 100, “Evaluation of Measurement Data- Guide to the Expression of Uncertainty in Measurement,-2008.
  151. Shin, K.-Y. and Mun, J. H., “A Multi-Camera Calibration Method using a 3-Axis Frame and Wand,-Int. J. Precis. Eng. Manuf., Vol. 13, No. 2, pp. 283-89, 2012.
  152. Muelaner, J. E., Wang, Z., Martin, O., Jamshidi, J., and Maropoulos, P., “Estimation of Uncertainty in Three-Dimensional Coordinate Measurement by Comparison with Calibrated Points,-Measurement Science and Technology, Vol. 21, No. 2, Paper No. 025106, 2010.
  153. Muelaner, J. E., Wang, Z., Martin, O., Jamshidi, J., and Maropoulos, P. G., “Verification of the Indoor GPS System, by Comparison with Calibrated Coordinates and by Angular Reference,-Journal of Intelligent Manufacturing, Vol. 23, No. 6, pp. 2323-331, 2012.
  154. Wang, Q., Zissler, N., and Holden, R., “Evaluate Error Sources and Uncertainty in Large Scale Measurement Systems,-Robotics and Computer-Integrated Manufacturing, Vol. 29, No. 1, pp. 1-1, 2013.
  
• 作者单位：Fiorenzo Franceschini (1)
  Maurizio Galetto (1)
  Domenico Maisano (1)
  Luca Mastrogiacomo (1)
  
  1. DIGEP (Department of Management and Production Engineering), Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, 10129, Italy
  
• ISSN：2005-4602

文摘

Last decades witness an increasing interest in Large-Scale/Large-Volume Dimensional Metrology (LSDM). Many fields of application, ranging from construction to shipbuilding and aerospace, have shown more and more accurate and versatile systems for geometric control and tolerancing. Especially in the last ten years, optical technology has registered a fundamental step forward both in terms of metrological performances, versatility and convenience of use. This is further demonstrated by the current large diffusion of laser tracker and photogrammetric systems. The growth is also complemented by the development of new standards, even though a comprehensive body specific for LSDM is still lacking. The twofold aim of the present survey is to present a bibliographical and bibliometric analysis of the field and to propose a scheme of classification of the main current approaches. As an output of this paper, a “LSDM Multi-perspective Model-is introduced, according to which dominant technologies and restrictions are analyzed with the aim of individuating current lacks and defining the roadmap for future development of new instruments and systems.