Organic semiconductor polymer nanodots as a new kind of off-on fluorescent probe for sulfide

详细信息    查看全文

• 作者：Cong Wang ; Junyong Sun ; Han Mei ; Feng Gao
• 关键词：Semiconducting polymer dots ; Quenching ; recovery ; Transmission electron microscopy ; Sulfide ; Fluorescent probe
• 刊名：Microchimica Acta
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：184
• 期：2
• 页码：445-451
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Nanochemistry; Nanotechnology; Characterization and Evaluation of Materials; Analytical Chemistry; Microengineering;
• 出版者：Springer Vienna
• ISSN：1436-5073
• 卷排序：184

文摘

The authors describe a fluorescent probe for sulfide that is based on carboxy-functionalized semiconducting polymer dots (P-dots). The dots were prepared from carboxy-functionalized poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-2,1′-3-thiadiazole)] (referred to as COOH-PFBT) via co-precipitation. The P-dots aggregate on addition of Cu(II) ions and their green fluorescence (with excitation/emission peaks at 455/540 nm) is then quenched. Fluorescence is restored on addition of sulfide to the aggregates due to the formation of CuS. This quenching-recovery (“off-on”) mechanism forms the basis for a new sulfide detection scheme. Fluorescence increases linearly in the 1.25 to 75.0 μM sulfide concentration range, with a 0.45 μM detection limit. Good selectivity over other anions is demonstrated. The method shows recoveries ranging between 98.6% and 105.7% when applied to the determination of sulfide in spiked real water samples.