The microstructures and mechanical properties of K465 superalloy joints, brazed with different clearances

详细信息    查看全文

• 作者：Yongchao Liu ; Hui Pan ; Haisheng Zhao ; Xuejun Zhang ; Yaoyong Cheng
• 关键词：Nickel alloys ; Gap ; Furnace brazing ; Microstructure ; High temperature ; Ultimate tensile strength
• 刊名：Welding in the World
• 出版年：2016
• 出版时间：January 2016
• 年：2016
• 卷：60
• 期：1
• 页码：93-98
• 全文大小：1,615 KB
• 参考文献：1.Wang D, Xiao C, Zhang G (2003) Effect of shell mould temperature on microstructure and mechanical properties of superalloy K465. J Iron Steel Res 15:208–211
  2.Yu Q, Xiao C, Song J (2005) Melt treatment time on microstructure and mechanical properties of as-cast Ni-based superalloy K465. J Aeronaut Mater 5:1–4
  3.Mao W, Zhou Y, Ye L (2008) Microstructures and properties of K465 superalloy joints brazed with different filler metals. Electric Weld Mach 38:65–68
  4.Yang JX, Zheng Q, Sun XF, Guan HR, Hu ZQ (2006) Formation of μ phase during thermal exposure and its effect on the properties of K465 superalloy. Scr Mater 55:331–334CrossRef
  5.Radzievskii VN, Yu FG, Kachenko GGT (1999) High-temperature brazing of dissimilar materials with a wide brazing gap using a filler. Weld Int 13(3):245–248CrossRef
  6.Su CY, Chou CP, Chang WJ, Liu MH (2000) Effect of mechanical properties using different filler metals on wide-clearance activated-diffusion
  azed Ni-based superalloy. J Mater Eng Perform 9(6):663–667CrossRef
  7.Bakhtiari R, Ekrami A (2012) The effect of gap size on the microstructure and mechanical properties of the transient liquid phase bonded FSX-414 superalloy. Mater Des 40:130–137CrossRef
  8.Yang J, Zheng Q, Zheng X (2009) Transformation of MC type carbide in K465 alloy during heating/cooling cycles. Foundry 58:42–45
  9.Liang H, Mao W, Sun J (2005) Microstructures of high temperature brazed joints of cast superalloy K465. J Mater Eng 7:7–11
  10.H Zhuang, E. Lugscheider (1989) High temperature brazing (National Defense Industry Press) Chapter 3
  11.Q Zhang, H Zhuang, (1989) Brazing and soldering manual (China Machine Press) Chapter 1
  12.Pei Z, Li J, Zhao M, Tian Y (2008) Study on microstructures and properties of K465 alloy. J N Univ (Nat Sci) 29:1126–1129
  13.Yang J, Zheng Q, Sun X, Guan H, Hu Z (2006) Relative stability of carbides and their effects on the properties of K465 superalloy. Mater Sci Eng A 429:341–347CrossRef
  14.Li X, Zhong Q, Cao C (2003) Wide-gap brazing between K403 and DZ4 superalloys. J Aeronaut Mater 23:11–15
  15.E. Lugscheider, TH. Schittny, E. Halmoy (1989) “Metallurgical aspects of additive-aided wide-clearance brazing with nickel-based filler metals,” Welding Research Supplement 9–13
  16.Huang X, Miglietti W (2012) “Wide gap braze repair of gas turbine blades and vanes—a review,”. J Eng Gas Turbines Power 134:010801-1–010801-17
  17.McGuire D, Huang X, Nagy D (2010) “Effect of W addition on the nucleation of borides in the wide gap brazed joint,”. Gas Turbines Power 132(6):062101CrossRef
  
• 作者单位：Yongchao Liu (1)
  Hui Pan (1)
  Haisheng Zhao (1)
  Xuejun Zhang (1)
  Yaoyong Cheng (1)
  
  1. Welding and Plastic Forming Division, Beijing Institute of Aeronautical Materials, AVIC, Beijing, 100095, China
  
• 刊物主题：Metallic Materials; Continuum Mechanics and Mechanics of Materials; Theoretical and Applied Mechanics;
• 出版者：Springer Berlin Heidelberg
• ISSN：1878-6669

文摘

K465 superalloy was brazed with brazing clearance of 0.1 and 0.5 mm, respectively. The microstructures of the brazed joints were observed, and compositions of typical microzones were analyzed by means of scanning electron microscope (SEM), energy-dispersive spectroscopy (EDS), and electron probe microanalysis (EPMA). In addition, high-temperature tensile tests for the brazed joints were also conducted. The results showed that for the brazed joints with 0.1 mm clearance, the low-melting phases such as the white blocky shaped (W, Cr)B boride phases and gray skeletal phases M₃B₂ boride phases were mainly precipitated in the central region of the brazed seam. However, the microstructure of the brazed joints with 0.5 mm clearance, which was pre-filled fully with one type of Ni-based alloy powder prior to brazing, was remarkably improved. Compared to the brazed joints with 0.1 mm clearance, the pre-filling of the alloy powder changed the distribution and morphology of low-melting phases, which was favorable to the improvement in high-temperature tensile properties of the brazed joints with 0.5 mm clearance. At 900 °C, the average tensile strength of the brazed joints with 0.1 mm clearance was only 488 MPa, while the average tensile strength of the brazed joints with 0.5 mm clearance increased to 615 MPa, which is 75 % of the K465 base metal tensile strength. Keywords (IIW Thesaurus) Nickel alloys Gap Furnace brazing Microstructure High temperature Ultimate tensile strength