摘要
以太阳电池的工程用模型和电路基本理论为基础,对带有旁路二极管的串联光伏组件在局部被遮挡条件下的输出电流进行了理论分析,通过引入透光因子的概念,用分段函数表示方法建立了输出电流方程,并将其拓展到建立大型光伏阵列模型之中。通过Matlab语言建立了光伏组件的Matlab计算仿真模型,分析验证了遮光面积、透光因子、光照强度及温度对光伏组件输出的影响。
Based on basic circuit theory,the branch output process of the partially shadowed serial solar module with bypass diode was carefully analyzed.The subsection function was applied to accurately describe partially shadowed serial PV module current output characteristics,and the corresponding computer simulation model was built in Matlab.Finally,the influence of the output could be analyzed and tested when the shading area,transmission factor,illumination intensity and temperature changed.
引文
[1]JEWELL W T,UNRUH T D.Limits on cloud-induced fluctuation in photovoltaic generation[J].IEEE Transactions on Energy Conversion,1990,5(1):8-14.
[2]雷蕾.光伏系统不均匀光照下最大功率点跟踪研究[D].重庆:重庆大学,2011.
[3]翟载腾,程晓舫,丁金磊,等.被部分遮挡的串联光伏组件输出特性[J].中国科学技术大学学报,2009,39(4):399-400.
[4]王军,王鹤,杨宏,等.太阳电池热斑现象研究[J].电源技术应用,2008,11(4):48-51.
[5]胡义华,陈昊,徐瑞东,等.光伏电池板在阴影影响下输出特性[J].电工技术学报,2011,24(1):124-126.
[6]杨永恒,周克亮.光伏电池建模及MPPT控制策略[J].电工技术学报,2011,26(1):229-231.
[7]苏建徽,余世杰,赵为,等.硅太阳电池工程用数学模型[J].太阳能学报,2001(22):409-412.
[8]刘晓艳,祁新梅,郑寿森,等.局部阴影条件下光伏阵列的建模与分析[J].电网技术,2010,34(11):192-194.
[9]BP Solar USA.BP SX60 Solarex data sheets[EB/OL].[2006-11-10].http://www.solarex.com.
[10]崔岩.太阳能光伏模板仿真模型的研究[J].系统仿真学报,2006,18(4):829-831.