摘要
通过正交试验,对化学镀Ni-P合金镀层的基础镀液配方和工艺条件进行了优化。向优化的基础镀液中加入PTFE乳液和表面活性剂FC4,以化工管材常用的材料20~#钢为基体,在PTFE乳液16~30 mL/L、FC4 0.40~0.60 g/L、温度86℃、pH值5.5的条件下,制备出表面呈明显疏水性的化学镀Ni-P/PTFE复合镀层。
The formula of basic plating bath and process conditions of electroless plating Ni-P alloy coatings were optimized by orthogonal experiment. The chemical pipe made of 20~# steel was taken as the substrate, and the electroless Ni-P/PTFE composite coatings that exhibit apparent hydrophobicity were prepared from the optimized base plating bath containing PTFE emulsion and surfactant FC4 under the conditions of PTFE emulsion 16~30 mL/L, FC4 0.40~0.60 g/L, temperature 86 ℃, pH value 5.5.
引文
[1] 李晶,李强,于化东,等.金属基超疏水制备方法与应用浅述[J].长春理工大学学报(自然科学版),2014,37(6):27-31.
[2] LIU Y,YIN X M,ZHANG J J,et al.A electro-deposition process for fabrication of biomimetic super-hydrophobic surface and its corrosion resistance on magnesium alloy[J].Electrochimica acta,2014,125:395-403.
[3] 黄丽.化工管道材料的设计与选用[J].广州化工,2014,42(16):107-108.
[4] 李小兵,刘莹.微观结构表面接触角模型及其润湿性[J].材料导报,2009,23(12):101-103.
[5] 钱斯文,王建方,吴文健.纳米微结构涂层的制备及其超疏水性研究[J].功能材料,2008,39(12):2053-2056.