基于流固耦合的管道机器人清淤装置外载荷参数优化

详细信息    查看全文 | 推荐本文 |

英文篇名：Optimization of External Load Parameters of Pipeline Robot Dredging Device Based on Fluid-solid Coupling 作者：罗继曼 ; 刘思远 英文作者：LUO Jiman;LIU Siyuan;College of Mechanical Engineering,Shenyang Jianzhu University; 关键词：管道机器人 ; 清淤装置 ; 流固耦合 ; 参数优化 ; 外载荷可行域 英文关键词：pipeline robot;;dredging device;;fluid-solid coupling;;parameter optimization;;external load feasible domain 中文刊名：JXYD 英文刊名：Machinery & Electronics 机构：沈阳建筑大学机械工程学院; 出版日期：2018-11-24 出版单位：机械与电子 年：2018 期：v.36;No.314 基金：国家自然科学基金项目(51575365);; 辽宁省自然科学基金项目(201602620) 语种：中文; 页：JXYD201811018 页数：5 CN：11 ISSN：52-1052/TH 分类号：73-77

摘要

为验证管道机器人清淤装置的清淤能力,应用流固耦合和参数优化的方法,在刚度和强度约束条件下,对结构的许用载荷进行分析。建立管道机器人模型并进行简化,导入到ANSYS中并划分六面体网格,首先将模型进行流固耦合下的强度仿真,验证了流体对清淤装置的强度影响很小;然后进入结构分析模块,应用参数优化的方法,以刮刀端部锥面受到轴向和切向外载荷为目标函数,以应力与应变为约束条件进行参数设置,对清淤装置的刮刀、扇形盘以及整体进行仿真计算;得到目标函数与约束条件的关系曲线、轴向与切向可行域曲线。研究结果表明,流体对结构的强度影响极小;轴向力许用范围0~5 000N,切向力许用范围0~3 500N,外载荷的可行域为研究清淤装置的清淤能力,以及过载保护系统具有指导性意义。
        In order to verify the dredging capacity of the pipeline robot dredging device,the fluid-solid coupling and parameter optimization methods were applied to analyze the allowable load of the structure under the constraints of stiffness and strength.The pipeline robot model was established and simplified.It was imported into ANSYS and divided into hexahedron meshes.Firstly,the model was simulated by fluid-solid coupling.It was verified that the fluid has little effect on the strength of the dredging device.Then,in the structural analysis module,the method of parameter optimization was applied,the axial and tangential external load on the taper surface of the end of the scraper was taken as the objective function,the parameters under the constraint of stress and strain were set,and the scraper,fan plate and the whole of the dredging device were simulated.The relation curves of objective function and constraint conditions,axial and tangential feasible region curves were obtained.The results show that the influence of fluid on the strength of the structure is very small.And the allowable range of axial force is 0~5 000 N,and the allowable range of tangential force is 0~3 500 N.The feasible domain of the external load is of guiding significance for studying the dredging capacity of the dredging device and the overload protection system.

引文

[1]刘平.典型隔板的强度刚度有限元分析[J].汽轮机技术,2004(05):333-335.
    [2]张庶,胡伟平,扶碧波,等.直升机机匣轴承与支座刚度强度相互影响的有限元分析[J].机械设计与制造,2014(07):15-18.
    [3]丁玉庆,马幼鸣.轿车车身强度及刚度有限元分析[J].解放军理工大学学报(自然科学版),2012,13(03):320-323.
    [4]彭欢,张怀亮,邹伟,等.硬岩掘进机推进液压缸结构参数优化[J].机械工程学报,2014,50(21):76-83.
    [5]胡丹梅,宗涛,张志超,等.自然通风逆流湿式冷却塔进风口导叶板结构参数优化[J].中国电机工程学报,2013,33(11):30-38.
    [6]张严之,王卉,张翼,等.高含固污泥中影响因素对流变特性的影响[J].环境工程学报,2016,10(12):7255-7259.
    [7]张奎,张志刚.给水排水管道系统[M].北京:机械工业出版社,2007.