摘要
电镀行业中,以镍电解净化后的新液为电解液,在电解液中加入微量携硫添加剂、辅助添加剂后进行电解,在一定的电解条件下通过一定的时间产出镍板,再进行漂洗、晾干、计量,最后取样分析镍板的含硫成分。阳极液送镍电解净化工序处理,循环使用,试验中产出的阳极泥和残极与镍电解生产系统产出的阳极泥和残极共同集中处理。
In the electroplating industry, the new solution after nickel electrolysis is used as an electrolyte, and a trace amount of sulfur additive and auxiliary additive are added to the electrolyte to perform electrolysis. The nickel plate is produced at a certain time under certain electrolysis conditions, and then rinsed, dried, and measured. Finally, the sulfur content of nickel plate is analyzed by sampling. The anode solution is sent to the nickel electrolysis purification process for treatment and recycling. The anode mud and the residue produced in the test are treated together with the anode mud and the residue produced in the nickel electrolysis production system.
引文
[1]翟秀静,李冰,尚广瑞,等.含硫活性镍的研究[J].有色矿冶,1998(4):31-33.
[2]杨少华,杨凤丽,周源.以新工艺制取含硫活性镍冠[J].湿法冶金,2002,21(3):136-138.
[3]侯晓川,彭俊.电解镍应用于电镀中存在的质量问题及改进措施[J].稀有金属与硬质合金,2012(5):70-72.
[4]T.Ripenbein,D.Golodnitsky,M.Nathan,E.Peled.Electroless Nickel Current Collector for 3d-microbatteries[J].Journal of Applied Electrochemistry,2010,40(2):435-444.
[5]张贝贝,王春霞,吴光辉,等.不同活化工艺对电解镍始极片结合力及性能的影响[J].表面技术,2017(1):224-228.
[6]杨少华,杨凤丽,周源.含硫活性镍冠的试生产[J].有色金属,2002(5):46-48.
[7]李永军,张强林,谭世雄,等.一种含硫镍颗粒的生产方法:中国,200610145344.7[P].2006-11-24.
[8]侯晓川,郭金良,丁喻,等.用于特殊电镀行业的含硫活性镍扣的制备[J].北京科技大学学报,2013(4):489-495.
[9]傅崇说.有色冶金原理[M].北京:冶金工业出版社,1984.
[10]覃奇贤,杨小伟.氨基磺酸盐电解液中金属镍的阳极行为[J].电镀与精饰,1997(5):3-7.
