摘要
莫尔信号细分是光栅传感器应用的必要环节,幅值分割法是实现莫尔信号细分的重要手段。为减小信号质量对细分结果造成的影响,误差补偿成为细分实现过程中必不可少的单元。本文针对数字式幅值细分方法开展研究,针对ADC参数对光栅莫尔信号误差补偿和细分效果的影响进行分析,建立ADC参数与莫尔信号直流补偿、幅值补偿和细分倍数之间的量化模型,设计并开展了直流和幅值补偿效果实验。研究结果表明:不同位宽的ADC对莫尔信号误差补偿和细分效果的影响不同,在本文模型的基础上,ADC位宽应提高1 bit~2 bit。研究成果对于莫尔信号数字式幅值分割细分系统的工程实现具有一定的指导意义和参考价值。
Moiré signal subdivision is a necessary part of the application of grating sensors,amplitude subdivision method is an important means to achieve Moiré signal subdivision. In order to reduce the impact of signal quality on the segmentation results,error compensation becomes an indispensable element in the process of subdivision. This paper studied the digital amplitude subdivision method,analyzed the influence of ADC parameters on the error compensation and subdivision effect of the grating Moiré signal,established the quantitative model of the DC compensation,amplitude compensation and subdivision multiplier between ADC parameters and Moiré signal,designed and implemented DC and amplitude compensation experiment. The results showed that: the effects of different bit width ADCs on the error compensation and subdivision are different,and the ADC bit width should be increased by 1 bit to 2 bit on the basis of this model. The research results have certain guiding significance and reference value for the engineering realization of the Moiré signal digital amplitude segmentation subdivision system.
引文
[1]丁旭,李彬华,杨晓晗.一种基于FPGA的光栅信号细分方法[J].传感技术学报,2016,29(6):846-852.
[2]王晓娜,钟玉龙,朱维斌,等.光栅数字细分的CORDIC算法总量化误差分析[J].计量学报,2016,37(1):10-14.
[3]徐腾寅.浅述计量光栅技术[J].计量与测试技术,2014,41(4):59-60.
[4]范国鹏,周莉,殷明,等.基于时空转换法的正弦波光栅尺位移测量系统设计[J].传感技术学报,2015,28(9):1367-1371.
[5]杨华晖,冯伟利,刘福.光栅莫尔条纹信号细分方法设计与Simulink仿真[J].宇航计测技术,2016,36(6):30-34.
[6]陈离.全天候莫尔条纹60倍细分[J].上海机械学院学报,1981(1):46-57.
[7]张建华.角度基准中莫尔条纹细分的研究[J].光学精密工程,1997,5(1):108-110.
[8]Takashi Emura,Wang Lei.High-Resolution Interpolator for Incremental Encoders Based on the Quadrature PLL Method[J].IEEE Transactions on Industrial Electronics,2000,47(1):84-90.
[9]唐小琦,刘世峰,王平江,等.正切法莫尔条纹信号幅值分割细分的误差分析[J].计量学报,2007,28(3):220-223.
[10]郭瑞.鉴频式莫尔条纹信号细分方法研究[J].现代电子技术,2013,36(1):99-101.
[11]刘浩,冯济琴,陈自然,等.基于预测理论的光栅信号精密细分方法研究[J].传感技术学报,2015,28(4):469-473.
[12]吴宏圣,曾琪峰,乔栋,等.提高光栅莫尔条纹信号质量的滤波方法[J].光学精密工程,2011,19(8):1945-1949.
[13]叶树亮,张潜,朱维斌.光栅莫尔信号正交误差实时补偿研究[J].仪器仪表学报,2017,38(1):57-64.
[14]余文新,邹自强,胡小唐.光栅纳米测量中的实时动态误差修正方法研究[J].仪器仪表学报,2001,22(3):63-64.
[15]吕孟军,张纯良,郭琪.莫尔条纹信号正切法细分精度分析[J].电子测量技术,2010,33(1):107-110.
[16]Mcilraith A H,Scott A D L.A Dynamic Moire Fringe Interpolator[J].IOPscience,1966,43:585-587.
