摘要
为了提高油菜秸秆和造纸污泥两种废弃物的能源化利用效率,对掺入造纸污泥的油菜秸秆进行冷压成型。从污泥含量、成型压力、含水率和秸秆粒径四个方面对新型油菜秸秆成型燃料的物理性能进行测试,并以抗压强度作为衡量指标。通过单因素分析确定因素试验范围,再利用响应面法对试验结果进行分析。结果表明因素的影响主次顺序为成型压力>含水率>秸秆粒径>污泥含量,新型油菜秸秆成型燃料的最佳成型工艺参数是:污泥含量25%,成型压力80 k N,含水率15%,秸秆粒径<1 mm,这样可使成型燃料的抗压强度达到0. 206 k N。
In order to improve the energy utilization efficiency of rapeseed straw and paper sludge,the rapeseed straw mixed with paper sludge was cold-formed. The physical properties of the new type of rape straw press process fuel were tested from sludge content,molding pressure,water content and straw particle size which was measured by compressive strength. The factor test range was determined by single factor analysis,and the test results were analyzed by the response surface method. The results show that the order of influence is that molding pressure > water content > stalk particle size > sludge content. The optimum molding process parameters of the new type of rape straw press process fuel are: sludge content is 25%,molding pressure is 80 k N,moisture content is 15% and stalk particle size < 1 mm,so that the compressive strength of the molding fuel can reach 0. 206 kN.
引文
1张蓓蓓,马颖,耿维,等.中国油菜秸秆资源的生物质能源利用潜力评价[J].可再生能源,2017,35(1):126-134Zhang Beibei,Ma Ying,Geng Wei,et al.Assessment of rape straw resources for biomass energy production in China[J].Renewable Energy Resources,2017,35(1):126-134
2王汉中.我国油菜产业发展的历史回顾与展望[J].中国油料作物学报,2010,32(2):300-302Wang Hanzhong.Review and future development of rapeseed industry in China[J].Chinese Journal of Oil Crop Sciences,2010,32(2):300-302
3马秋林,韩鲁佳,黄光群.油菜秸秆燃烧特性及其主要气体产物表征分析[J].农业机械学报,2014(增刊1):196-201Ma Qiulin,Han Lujia,Huang Guangqun.Quantitative characterization of rape straw combustion and gas emissions using TG/DSC-FTIR-MS technology[J].Journal of Agricultural Machinery,2014(S1):196-201
4刘延春,张英楠,刘明,等.生物质固化成型技术研究进展[J].世界林业研究,2008,21(4):41-47Liu Yanchun,Zhang Yingnan,Liu Ming,et al.Reviews on solidification technology of biomass[J].World Forestry Research,2008,21(4):41-47
5 Rahaman S A,Salam P A.Characterization of cold densified rice straw briquettes and the potential use of sawdust as binder[J].Fuel Processing Technology,2017,158(Complete):9-19
6蒋龙波.城市污泥与典型生物质的混合成型行为及机理研究[D].长沙:湖南大学,2015Jiang Longbo.Characteristics and mechanisms study on co-pelletization of sewage sluge and typical biomass[D].Changsha:Hunan University,2015
7姜秋玥.玉米秸轩混污泥燃料成型及其燃烧特性研究[D].锦州:辽宁工业大学,2016Jiang Qiuyue.Research on forming and combustion characteristics of fuel made by corn stalks and sludge[D].Jinzhou:Liaoning Unversity of Technology,2016
8王爱民,白妮,孙志勇,等.城市污泥作为型焦粘结剂的工艺及机理研究[J].硅酸盐通报,2016,35(11):3664-3668Wang Aimin,Bai Ni,Sun Zhiyong,et al.Technology and mechanism of municipal sludge as formed coke binder[J].Bulletin of the Chinese Ceramic Society,2016,35(11):3664-3668
9李婷婷,黄艳琴,刘华财,等.造纸污泥添加剂对麦秆灰烧结熔融特性的影响[J].燃料化学学报,2017,45(11):1323-1331Li Tingting,Huang Yanqin,Liu Huacai,et al.Effects of paper mill residual additives on sintering and melting characteristic of wheat straw[J].Journel of Fuel Chemistry and Technology,2017,45(11):1323-1331
10赵培涛,葛仕福,张长飞,等.污泥及秸秆生物质固体燃料制备中试工艺及燃烧特性[J].农业工程学报,2012,28(9):165-170Zhao Peitao,Ge Shifu,Zhang Changfei,et al.Pilot process and combustion characteristics of sludge-straw derived solid biofuel[J].Transactions of the Chinese Society of Agricultural Engineering,2012,28(9):165-170
11涂德浴,李安心,何贵生.水稻秸秆冷压成型工艺参数优化[J].中国农业科技导报,2015,17(3):56-62Xu Deyu,Li Anxin,He Guisheng.Parameter optimization of rice straw cold press process[J].Journal of Agricultural Science and Technology,2015,17(3):56-62
12张百良,王许涛,杨世关.秸秆成型燃料生产应用的关键问题探讨[J].农业工程学报,2008,24(7):296-300Zhang Bailiang,Wang Xutao,Yang Shiguan.Key problems in production and application of straw densification briquetting fuel[J].Transactions of the CSAE,2008,24(7):296-300
13 Ren W X,Chen H B.Finite element model updating in structural dynamics by using the response surface method[J].Engineering Structures,2010,32(8):2455-2465
14李莉,张赛,何强,等.响应面法在试验设计与优化中的应用[J].实验室研究与探索,2015,34(8):41-45Li Li,Zhang Sai,He Qiang,et al.Application of response surface methodology in experiment design and optimization[J].Research and Exploration in Laboratory,2015,34(8):41-45
15 Zhang X,Peng W,Han L,et al.Effects of different pretreatments on compression molding of wheat straw and mechanism analysis[J].Bioresour Technol,2017,251:210-217
