碳素回转窑余热流体热能转换分析及建模
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Analysis and Modeling of the Heat Fluid Thermal Conversion of Carbon Rotary Kiln Waste
  • 作者:徐庆新 ; 王植槐
  • 英文作者:Xu Qingxin;Wang Zhihuai;Aluminum Corporation of China Guizhou Branch;
  • 关键词:回转窑 ; 模型 ; 余热 ; 热管
  • 英文关键词:rotary kiln;;model;;waste heat;;heat pipe
  • 中文刊名:XGXY
  • 英文刊名:Journal of Hubei Engineering University
  • 机构:中国铝业贵州分公司;
  • 出版日期:2016-12-01 22:38
  • 出版单位:湖北工程学院学报
  • 年:2016
  • 期:v.36;No.165
  • 语种:中文;
  • 页:XGXY201606026
  • 页数:5
  • CN:06
  • ISSN:42-1836/Z
  • 分类号:119-123
摘要
为了能有效地降低回转窑废气中有害物质含量及增大回转窑内壁的传热系数,本文基于碳素回转窑余热流体热能转换的机理分析,提出了采用热管换热来吸收烟气中的热能;通过对烟气成分探究,进一步降低了烟气粉尘含量。在此基础上,建立了余热流体模型及回转窑模型,着重分析计算了换热效率、热能损失以及余热回收过程中的线路设计,温度降低后的烟气达到了排放废气标准要求。研究表明,设计余热回收系统装置,对企业降低能耗减少污染废气排放是有益的。
        In order to effectively reduce the content of harmful substances in the exhaust gas of rotary kiln and increase the heat transfer coefficient of the inner wall of the rotary kiln,this paper proposes to use the heat pipe heat exchanger for absorbing the flue gas heat based on the analysis of the heat fluid energy conversion mechanism of carbon rotary kiln waste.The exhaust gas dust content is reduced by exploring the smoke constituents.Furthermore,the rotary kiln model and waste heat fluid model are established by analyzing and calculating the heat transfer efficiency,heat loss and the circuit design of the heat recovery process.The emission standards are reached after reducing the flue gas temperature.Researches show that the design of heat recovery system is beneficial for enterprises to reduce energy consumption and pollution emissions.
引文
[1]刘鸿文.简明材料力学[M].北京:高等教育出版社,2008.128-129.
    [2]高占洋.增压锅炉余热回收阻力特性数值模拟研究[D].哈尔滨:哈尔滨船舶锅炉涡轮机研究所,2013.
    [3]张方炜.烟气余热利用研究[J].发电设计,2010,8(4):48-52.
    [4]赵之军,冯伟忠,张玲,等.电站锅炉排烟余热回收的理论分析与工程实践[J].动力工程.2009(11):994-1012.
    [5]吴静,李选友,陈宝明,等.大颗粒低填充率外热式回转窑传热系数模型的构建[J].农业工程学报,2014,30(13):256-262.
    [6]仝庆居,王学敏.锅炉烟气余热回收利用技术[J].工业技术,2009,18:71-71.
    [7]Zhang Y,Faghri A.Heat transfer in a pulsating heat pipe with open end[J].International Journal of Heat&Mass Transfer,2002,45(4):755-764.
    [8]Xu G,Huang S,Yang Y,et al.Techno-economic analysis and optimization of the heat recovery of utility boiler flue gas[J].Applied Energy,2013,112(4):907-917.
    [9]马文蔚,解希顺,周雨青.物理学[M].北京;高等教育出版社,2006:174-175.
    [10]李斌,赵明杰.热管在烟气余热回收系统中的应用[J].广州化工,2009,37(7):158-161.
    [11]牛宪华.燃煤锅炉低温烟气余热利用探讨[J].油气田环境保护,2011,21(3):25-26.
    [12]Guo J.Technology reformation for improving the inlet air temperature of air pre-heater of Haibowan Power Plant[C]//Materials for Renewable Energy&Environment(ICMREE),2011International Conference on.IEEE,2011,1:965-967.
NGLC 2004-2010.National Geological Library of China All Rights Reserved.
Add:29 Xueyuan Rd,Haidian District,Beijing,PRC. Mail Add: 8324 mailbox 100083
For exchange or info please contact us via email.