摘要
研究480℃/20 h,430℃/2 h+490℃/12 h和500℃/16 h这3种均匀化工艺对Al-Mg合金腐蚀性能和疲劳性能的影响;通过晶间腐蚀(IGC)和慢应变速率拉伸(SSRT)腐蚀研究这3种工艺对Al-Mg合金O态板材的腐蚀性能的影响;通过疲劳裂纹扩展速率和Kahn撕裂实验研究这3种工艺对Al-Mg合金O态板材疲劳性能的影响。研究结果表明:与其他2种工艺相比,经430℃/2 h+490℃/12 h均匀化后得到的板材抗晶间腐蚀性能最佳,腐蚀速率为2.287 8 mg/cm~2,应力腐蚀敏感指数ISSRT最小,为0.068;经430℃/2 h+490℃/12 h均匀化后得到的板材在高应力强度因子范围下抗裂纹扩展性能最佳,其单位面积裂纹形核功与经500℃/16h处理得到的板材的形核功接近。
The effects of homogenization on corrosion and fatigue performance of Al-Mg alloy were studied after being homogenized using three homogenization technologies, i.e., 480 ℃/20 h, 430 ℃/2 h+490 ℃/12 h and 500 ℃/16 h, the corrosion performance of Al-Mg alloy sheets were tested by intergranular corrosion(IGC) and slow strain rate testing(SSRT), the fatigue performance of Al-Mg alloy sheets were tested by fatigue crack growth rate testing and Kahn tear test. The results show that Al-Mg alloy after homogenization by 430 ℃/2 h+490 ℃/12 h has the best intergranular corrosion resistance, the rate of corrosion is 2.287 8 mg/cm~2, and the susceptibility index of slow strain rate test is 0.068.Al-Mg alloy after homogenization by 430 ℃/2 h+490 ℃/12 h has the best crack propagation resistance in the range of high intensity factor, and the unit initiation energy is close to that of the Al-Mg alloy sheets after annealing homogenization through the treatment at 500 ℃ for 16 h.
引文
[1]LI Huizhong,WANG Haijun,LIANG Xiaopeng,et al.Effect of Sc and Nd on the microstructure and mechanical properties of Al-Mg-Mn alloy[J].Journal of Materials Engineering and Performance,2012,21(1):83-88.
[2]JONES R H,BAER D R,DANIELSON M J,et al.Role of Mg in the stress corrosion cracking of an Al-Mg alloy[J].Metallurgical&Materials Transactions A,2001,32(7):1699-1711.
[3]SEARIES J L,GOUMA P I,BUCHHEIT R G.Stress corrosion cracking of sensitized AA5083(Al-4.5Mg-1.0Mn)[J].Metallurgical&Materials Transactions A,2001,32(11):2859-2867.
[4]POPOVIC M,ROMHANJI E.Stress corrosion cracking susceptibility of Al-Mg alloy sheet with high Mg content[J].Journal of Materials Processing Technology,2002,125(2):275-280.
[5]蒋海春,叶凌英,张新明,等.5059高镁铝合金均匀化热处理工艺[J].中南大学学报(自然科学版),2014,45(12):4139-4141.JIANG Haichun,YE Lingying,ZHANG Xinming,et al.Homogenization heat treatment process of 5059 high Mg containing aluminum alloy[J].Journal of Central South University(Science and Technology),2014,45(12):4139-4141.
[6]陈星霖,罗兵辉,刘成.时效温度和镁含量对高镁铝合金微观组织和腐蚀性能的影响[J].材料科学与工程学报,2009,27(4):548-552.CHEN Xinglin,LUO Binghui,LIU Cheng.Effects of aging temperature and Mg content on the microstructure and corrosive properties of a high-Mg aluminum alloy[J].Journal of Materials Science and Engineering,2009,27(4):548-552.
[7]HUSKINS E L,CAO B,RAMESH K T.Strengthening mechanisms in an Al-Mg alloy[J].Materials Science&Engineering A,2010,527(6):1292-1298.
[8]LI Yin,HUNG Yuanchuan,DU Zhiyong,et al.The effect of homogenization on the corrosion behavior of Al-Mg alloy[J].Physics of Metals&Metallography,2018,119(4):339-346.
[9]刘晓涛,董杰,崔建忠,等.高强铝合金均匀化热处理[J].中国有色金属学报,2003,13(4):909-913.LIU Xiaotao,DONG Jie,CUI Jianzhong,et al.Homogenizing treatment of high strength aluminium alloy cast under electric magnetic field[J].The Chinese Journal of Nonferrous Metals,2003,13(4):909-913.
[10]CARROLL M C,BUCHHEIT R G,DAEHN G S,et al.Optimum trace copper levels for SCC resistance in a Zn-modified Al-5083 alloy[J].Materials Science Forum,2002,396/397/398/399/400/401/402:1443-1448.
[11]梁凌宇,王弘,董轩成.厚度对5083铝合金薄板超高周弯曲疲劳性能的影响[J].机械工程材料,2016,40(3):85-88.LIANG Lingyu,WANG Hong,DONG Xuancheng.Effect of thickness on very high cycle bending fatigue properties of 5082aluminum alloy sheet[J].Materials for Mechanical Engineering,2016,40(3):85-88.
[12]杨磊,罗兵辉,柏振海,等.添加Zn对5083铝合金组织和腐蚀性能的影响[J].中南大学学报(自然科学版),2012,43(12):4666-4668.YANG Lei,LUO Binghui,BAI Zhenhai,et al.Effect of Zn on microstructure and corrosion ropery of 5083 alloy[J].Journal of Central South University(Science and Technology),2012,43(12):4666-4668.
[13]周庆波,张宏伟,刘科研,等.化学成分对5083铝合金性能的影响[J].轻合金加工技术,2007,35(10):33-34.ZHOU Qingbo,ZHANG Hongwei,LIU Keyan,et al.Effect of chemical components on properties of 5083 aluminium alloy[J].Light Alloy Fabrication Technology,2007,35(10):33-34.
[14]罗兵辉,单毅敏,柏振海.退火温度对淬火后冷轧5083铝合金组织及腐蚀性能的影响[J].中南大学学报(自然科学版),2007,38(5):802-806.LUO Binghui,SHAN Yimin,BAI Zhenhai,et al.Effect of annealing temperature on microstructure and corrosive properties of cold-rolled 5083 aluminum alloy after quenching[J].Journal of Central South University(Science and Technology),2007,38(5):802-806.
[15]DAVENPORT A J,YUAN Y,AMBAT R,et al.Intergranular corrosion and stress corrosion cracking of sensitized AA5182[J].Materials Science Forum,2006,519/520/521:641-646.
[16]MIYAKE Y,SATO Y,TERANISHI R,et al.Effect of heat treatments on the microstructure and formability of Al-Mg-MnSc-Zr alloy[J].Micron,2017,101:151-155.
[17]POPOVIC M,ROMHANJI E.Stress corrosion cracking susceptibility of Al-Mg alloy sheet with high Mg content[J].Materials Processing Technology,2002,125(2):275-280.
[18]彭金波,康国政,刘宇杰,等.5083-H111轧制铝合金的低周疲劳行为[J].机械工程材料,2015,39(1):39-40.PENG Jinbo,KANG Guozheng,LIU Yujie,et al.Low cycle fatigue behavior of 5083-H111 rolled aluminum alloy[J].Materials for Mechanical Engineering,2015,39(1):39-40.
