摘要
本文介绍了青海共和县恰卜恰镇干热岩勘探孔GR1井的钻探施工概况以及采用的关键技术。通过对孕镶金刚石全面钻头技术、耐高温聚合物防塌钻井液技术、大直径螺杆复合钻进技术、底喷式聚晶取心钻头技术、壁钩式套铣打捞技术等难点的研究,解决了干热岩钻探碎岩效率低、钻进速度慢、钻井液高温稳定性及护壁与携岩能力差等难题,形成了一套适用于深部大口径干热岩钻探工艺技术,有效降低干热岩钻井与成井成本,对提高干热岩资源利用的经济可行性意义重大。共和盆地GR1干热岩勘探孔在地下3705. 42m深处探获温度达到236℃以上的干热岩,这是我国首次在青海共和盆地钻获高温优质干热岩体,实现了我国干热岩勘查重大突破。
This paper presents the situation of drilling-site construction and the key techniques used in the drilling of the dry-hot rock exploration hole GR1 at Qiabuqian town,Gonghe county,Qinghai province. We have conducted research on the difficult problems such as the impregnated diamond full-scale drilling bit,high temperature resistant polymer anti-collapse drilling fluid,large-diameter screw compound drilling,bottom-jet polycrystalline coring bit and the wall hook type milling and salvage. We have also tackled problems of low efficiency,slow drilling speed,high temperature stability of drilling fluid and poor wall protection and cuttings carrying capacity of the dry-hot rock drilling. And a set of drilling techniques for deep large-diameter dry-hot rock have been developed. The cost of dry-hot rock drilling and well completion has been reduced effectively. It is of great significance for improving the economic feasibility in utilization of dry-hot rock resources. The hot-dry rock's temperature at a depth of 3705. 42 m in the exploration drilling hole GR1 is above 236 ℃. This is the first time that China has obtained high temperature and high quality dry-hot rock mass at Gonghe basin of Qinghai Province,showing a major breakthrough in the exploration of dry-hot rock in our country.
引文
Geng Ling-qiang,Liu Song-liang,Wu Shao-qing,Cui Shuan-ling.2007.Application of auger drilling technology in extra-deep geothermal wells[J].Coal Geology of China,19(s):76-77(in Chinese with English abstract)
Hu Ji-liang,Tao Shi-xian,Shan Wen-jun,Liu San-yi.2015.Overview of ultra-deep well high-temperature drilling fluid technology and discussion of its research direction[J].Geology and Exploration,48(1):155-159(in Chinese with English abstract)
Jia Jun,Zhang De-long,Weng Wei,Huang Yu-wen,Shan Wen-jun,Xiong Zheng-qiang.2015.Key technology and development of hot dry rock drilling[J].Science&Technology Review,33(19):1-6(in Chinese with English abstract)
Jia Mei-ling,Cai Jia-pin,Huang Yu-wen,Zhao Er-xin.2003.Research on new type of inserted bits used in scientific drilling[J].Exploration Engineering(Rock&Soil Drilling and Tunneling),30(s):289-291(in Chinese with English abstract)
Li Ya-chen,Duan Chen-yang,Zheng Xiu-hua.2016.Best practices for high temperature geothermal drilling[J].Geology and Exploration,52(1):173-181(in Chinese with English abstract)
Lu Chuan,Wang Gui-ling.2015.Current status and prospect of hot dry rock research[J].Science&Technology Review,33(19):13-21(in Chinese with English abstract)
Ran Heng-qian,Feng Qi-zeng.2010.Some technical issues on hot dry rock exploration in China[J].Exploration Engineering(Rock&Soil Drilling and Tunneling),37(10):17-21(in Chinese with English abstract)
Shan Wen-jun,Tao Shi-xian,Fu Fan,Yue Wei-min,Zhao Zhi-tao.2014.240℃high temperature drilling fluid technology[J].Drilling Fluid&Completion Fluid,31(4):10-13(in Chinese with English abstract)
Shen Li-na,Ruan Hai-long.2010.Some technical development of diamond bit both in China and abroad[J].Exploration Engineering(Rock&Soil Drilling and Tunneling,38(5):78-80(in Chinese with English abstract)
Sun Zhi-xin,Li Bai-xiang,Wang Zhi-lin.2011.Exploration of the possibility of hot dry rock occurring in the Qinghai Gonghe basin[J].Hydrogeology&Engineering Geology,38(2):119-124(in Chinese with English abstract)
Sun Jin-sheng,Yang Ze-xing.2006.Study on the water based drilling fluid with ultra high temperature(240℃)tolerance[J].Drilling Fluid&Completion Fluid,23(1):15-18(in Chinese with English abstract)
Wang Nian-you,Xie Wen-wei,Feng Qi-zeng,Su Chang-shou,Song Zhibin.2015.Three into one drilling tool which combined wire line core,hydro-hammer and PDM[J].Exploration Engineering(Rock&Soil Drilling and Tunneling),42(s):45-47(in Chinese with English abstract)
Xue Jun.2000.Preliminary study on matrix using in higher temperature for continental scientific drilling[J].Exploration Engineering(Rock&Soil Drilling and Tunneling).27(4):62-66(in Chinese with English abstract)
Yan Xiao-li,Zheng Shu-lou,Wang Zhen-fu.2010.Disscussion on deep geothermal well completion technology in central Shanxi area[J].Exploration Engineering(Rock&Soil Drilling and Tunneling,38(5):36-39(in Chinese with English abstract)
Yang Ji-long,Hu Ke.2001.A review of hot dry rock(HDR)research and development in the world[J].World Geology,20(1):43-50(in Chinese with English abstract)
You Xin-jun,Wang Min-sheng.2016.Key drilling technologies for efficient development of high-temperature geothermal resources[J].Geology and Exploration,52(4):718-724(in Chinese with English abstract)
Zeng Yi-jin.2015.Technical progress and thinking for development of hot dry rock(HDR)geothermal resources[J].Petroleum Drilling Techniques,43(2):1-7(in Chinese with English abstract)
耿令强,刘松良,吴绍清,崔栓岭.2007.螺杆钻进技术在超深地热井中的应用[J].中国煤田地质,19(s):76-77
胡继良,陶士先,单文军,刘三意.2015.超深井高温钻井液技术概况及研究方向的探讨[J].地质与勘探,48(1):155-159
贾军,张德龙,翁炜,黄玉文,单文军,熊正强.2015.干热岩钻探关键技术及进展[J].科技导报,33(19):1-6
贾美玲,蔡家品,黄玉文,赵尔信.2003.大陆科学钻探用新型镶嵌式钻头的研究[J].探矿工程(岩土钻掘工程),30(s):289-291
李亚琛,段晨阳,郑秀华.2016.高温地热钻井的最佳实践[J].地质与勘探,52(1):173-181
陆川,王贵玲.2015.干热岩研究现状与展望[J].科技导报,33(19):13-21
冉恒谦,冯起赠.2010.我国干热岩勘查的有关技术问题[J].探矿工程(岩土钻掘工程),37(10):17-21
单文军,陶士先,付帆,岳伟民,赵志涛.2014.抗240℃高温钻井液技术[J].钻井液与完井液,31(4):10-13
沈丽娜,阮海龙.2011.国内外金刚石钻头的部分技术进展[J].探矿工程(岩土钻掘工程),38(5):78-80
孙知新,李百祥,王志林.2011.青海共和盆地存在干热岩可能性探讨[J].水文地质工程地质,38(2):119-124
孙金声,杨泽星.2006.超高温(240℃)水基钻井液体系研究[J].钻井液和完井液,23(1):15-18
王年友,谢文卫,冯起赠,苏长寿,宋志彬.2015.绳索取心、液动潜孔锤、螺杆马达“三合一”钻具[J].探矿工程(岩土钻掘工程),42(s):45-47
薛军.2000.大陆科学钻探孕镶金刚石钻头胎体配方的前期研究[J].探矿工程(岩土钻掘工程),27(4):62-66
闫小利,郑树楼,王振福.2010.陕西关中地区深层地热井成井工艺探讨[J].探矿工程(岩土钻掘工程),37(5):36-39
杨吉龙,胡克.2001.干热岩(HDR)资源研究与开发技术综述[J].世界地质,20(1):43-50
尤新军,王敏生.2016.高温地热高效开发钻井关键技术[J].地质与勘探,52(4):718-724
曾义金.2015.干热岩热能开发技术进展与思考[J].石油钻探技术,43(2):1-7
