摘要
针对现有的嵌入式存储系统中存在的存储速度慢、接口复杂等问题,提出并实现一种基于Compact FLASH(CF)卡和STM32微处理器的数据存储系统,并进行了FatFs文件系统移植。该系统通过STM32微处理器带有的灵活的静态存储器控制器(FSMC)接口实现Memory模式下CF卡存储器的扩展,同时,测试并分析实现最大写入速度的条件。测试结果表明,在CF卡Memory模式下,每次申请扇区数为128时,可以达到最大10 MB/s的平均连续写入速度;该方案存储速度快、实现简单,适用于对存储速度和容量均有要求的场合。
In allusion to the slow storage speed and complex interface problems existing in the current embedded storage system,a data storage system based on the Compact FLASH(CF)card and STM32 microprocessor is proposed and implemented,and the FatFs file system is transplanted. In the system,the CF card memory expansion in the Memory mode is realized by using the flexible static memory controller(FSMC)interface provided by the STM32 microprocessor. The conditions for achieving the maximum write-in speed are tested and analyzed. The test results show that the average continuous write-in speed of the system can reach up to 10 MB/s as the sector number applied for each time is 128 in the Memory mode of the CF card,and the scheme has a fast storage speed,is easy to be implemented,and applicable in occasions where both the storage speed and capacity requirements are needed.
引文
[1]王监.基于Micro SD卡的存储系统设计[J].现代导航,2017,8(4):293-296.WANG Jian.Design of storage system based on Micro SD card[J].Modern navigation,2017,8(4):293-296.
[2]夏兰,贾晓冬.基于MSP430和SD卡的心电信号采集系统设计[J].现代电子技术,2015,38(21):20-23.XIA Lan,JIA Xiaodong.Design of ECG signal acquisition system based on MSP430 and SD card[J].Modern electronics technique,2015,38(21):20-23.
[3]蔡红专,刘强,陈琎.嵌入式系统中基于SPI协议的SD卡扩展实现[J].微型机与应用,2014,33(19):23-26.CAI Hongzhuan,LIU Qiang,CHEN Jin.The agreement extension of embedded systems based on SD card and SPI[J].Microcomputer&its applications,2014,33(19):23-26.
[4]刘智勇,陈鹏飞,宿磊,等.基于STM32芯片的U盘/SD卡文件传输技术研究[J].现代电子技术,2014,37(18):107-109.LIU Zhiyong,CHEN Pengfei,SU Lei,et al.Study on file transmission between U disk and SD card based on STM32chip[J].Modern electronics technique,2014,37(18):107-109.
[5]李鸿征.高性能Micro SD卡读写器的设计与开发[J].焦作大学学报,2017,31(4):63-66.LI Hongzheng.Design and development for high-performance micro SD card reader[J].Journal of Jiaozuo University,2017,31(4):63-66.
[6]夏光辉,秦建军,王大成.基于FPGA的双CF卡数据采集系统设计[J].电子设计工程,2016,24(4):19-21.XIA Guanghui,QIN Jianjun,WANG Dacheng.Design of dual CF card data acquisition system based on FPGA[J].Electronic design engineering,2016,24(4):19-21.
[7]熊海军,王耀青.一种基于FPGA的多路串口控制器设计[J].测控技术,2013,32(9):137-139.XIONG Haijun,WANG Yaoqing.Design of multi-channel serial controller based on FPGA[J].Measurement&control technology,2013,32(9):137-139.
[8]田晓明,陈怡伶.基于ARM的嵌入式系统CF卡存储技术[J].中国测试,2010,36(3):86-88.TIAN Xiaoming,CHEN Yiling.Memory technology of CF card based on ARM embedded system[J].China measurement&test,2010,36(3):86-88.
[9]吴东兴,徐造林.基于CF卡的嵌入式文件系统设计[J].计算机技术与发展,2009,19(2):91-93.WU Dongxing,XU Zaolin.Embedded file system design based on CompactFLASH card[J].Computer technology and development,2009,19(2):91-93.
[10]CompactFLASH Association.CF+&CompactFLASH specification revision 4.1a[EB/OL].[2008-12-22].https://www.compactflash.org/cfa-specifications.
[11]STMicroelectronics.RM0008:STM32F101xx,STM32F102xx,STM32F103xx,STM32F105xx and STM32F107xx advanced ARM-based 32-bit MCUs[EB/OL].[2013-05-06].http://www.elecfans.com/soft/39/2013/20130506316542.html.
