摘要
目的研究芳基取代羧酸离子液体的分子结构与其摩擦学性能、物理化学性质之间的构效关系。方法分别以4-甲基苯乙酸(4-Me-PA)、4-叔丁基苯乙酸(4-tBu-PA)、4-苯基丁酸(PB)、异丁基苯丙酸钠(布洛芬钠,Ibu)作为阴离子源,以四丁基氢氧化铵(N4444OH)、四丁基氯化铵(N4444Cl)、1-丁基-3-甲基咪唑氯盐(C4mim)、1-辛基-3-甲基咪唑氯盐(C8mim)为阳离子源,通过酸碱中和反应和离子交换反应合成了七种芳基取代羧酸离子液体。以市售合成润滑油聚α-烯烃(PAO10)和传统离子液体1-丁基-3-甲基咪唑四氟硼酸盐(L-B104)为对照样,对其分子结构与摩擦学性能、物理化学性质之间的构效关系进行了系统研究。结果芳基取代羧酸离子液体的热分解温度在161~217℃之间,水解反应的p H值保持不变,具有较高的水解稳定性和热稳定性,对金属基底材料无腐蚀,作为润滑剂使用时,在钢/钢、钢/铜、钢/铝三种摩擦副上的平均摩擦系数f和平均磨损体积V分别为f钢/钢=0.081,f钢/铜=0.067,f钢/铝=0.080,V钢/钢=3.24×10-3 mm3,V钢/铜=22.04×10-3 mm3,V钢/铝=22.35×10-3 mm3,均具有良好的减摩抗磨性能,它们的分子结构对其摩擦学性能和物理化学性质均具有较明显的影响。结论芳基取代羧酸离子液体中,阳离子上取代烷基链越长,其热分解温度越高,运动黏度和黏度指数也越大;阴离子的空间体积越大,相应离子液体的黏度指数越大;它们在钢/钢、钢/铜、钢/铝摩擦副上均表现出良好的润滑作用。这主要是因为在摩擦过程中离子液体在摩擦副表面形成了稳定的吸附膜,在这层吸附膜中,阴阳离子的影响作用不同,阳离子对其减摩作用的影响较大,阴离子对其抗磨作用的影响较大;这层吸附膜的润滑性能还受到黏度的影响,具有适中运动黏度和较大黏度指数的离子液体作为润滑剂,摩擦学性能更加优异。
The work aims to study structure-function relationship between molecular structure and tribological/physico chemical properties of aryl-substituted aromatic acid ionic liquids(ILs). With 4-methylphenylacetic acid(4-Me-PA), 4-tert-butylphenylacetic acid(4-t Bu-PA), 4-phenylbutyric acid(PB) and ibuprofen sodium salt(Ibu) as anion sources, and tetrabutylammonium hydroxide(N4444 OH), tetrabutylammonium chloride(N4444 Cl), 1-butyl-3-methylimidazolium chloride(C4 mim), 1-octyl-3-methylimidazolium chloride(C8 mim) as cation sources, seven aryl-substituted aromatic acid ILs were synthesized based upon acid-base neutralization and ion exchange reaction. The structure-activity relationship between molecular structure and tribological/physicochemical properties of ILs was systematically investigated with commercially available synthetic poly-alpha-olefin(PAO 10) and 1-butyl-3-methylimidazolium tetrafluoroborate(L-B 104) as control samples. These ILs exhibited good hydrolysis stability, high thermal stability, and no corrosion to metallic substrates. Thermal decomposition temperature of the ILs ranged from 161 to 217 ℃, and p H value of hydrolysis reaction remained unchanged. Average friction coefficient f and average wear volume V of the three pairs was fsteel/steel=0.081, fsteel/copper=0.067, fsteel/aluminum=0.080, Vsteel/steel=3.24×10-3 mm3, Vsteel/copper=22.04×10-3 mm3, Vsteel/aluminum=22.35×10-3 mm3, respectively, when being applied to steel/steel, steel/copper and steel/aluminum friction pairs. These ILs had good anti-friction and anti-wear properties, and their molecular structure had significant effects on tribological/physicochemical properties. In the aryl-substituted aromatic acid ionic liquids, the longer the substituted alkyl chain is, the higher the thermal decomposition temperature is, the higher the kinematic viscosity and viscosity index are. The larger the space volume of anions is, the higher the viscosity index of corresponding ion liquids is. These ILs exhibited good lubrication on steel/steel, steel/copper, and steel/aluminum friction pairs, mainly owing to the formation of a stable adsorption film on the friction pairs. The anions and cations in the film have different effects, cations play a major role in reducing friction, while anions play a major role in resisting wear. The lubricating property is also affected by viscosity, the ILs with appropriate kinematic viscosity and high viscosity index exhibit more excellent tribological properties.
引文
[1]WELTON T.Room-temperature Ionic Liquids.Solvents for Synthesis and Catalysis[J].Chemical Reviews,1999,99:2071-2083.
[2]FAN M J,LIANG Y M,ZHOU F,et al.Dramatically Improved Friction Reduction and Wear Resistance by in Situ Formed Ionic Liquids[J].RSC Advances,2012,2(17):6824-6830.
[3]HAGIWARA R,ITO Y.Room Temperature Ionic Liquids of Alkylimidazolium Cations and Fluoroanions[J].Journal of Fluorine Chemistry,2000,105(2):221-227.
[4]TORIMOTO T,TSUDA T,OKAZAKI K,et al.New Frontiers in Materials Science Opened by Ionic Liquids[J].Advanced Materials,2010,22(11):1196-1221.
[5]GORDON C M.New Developments in Catalysis Using Ionic Liquids[J].Applied Catalysis A:General,2001,222(1):101-117.
[6]RAO C J,VENKATESAN K A,NAGARAJAN K,et al.Dissolution of Uranium Oxides and Electrochemical Behavior of U(VI)in Task Specific Ionic Liquid[J].Radiochimca Acta,2008,96(7):403-409.
[7]SHAH S N,MUTALIB M I A,PILUS R B M,et al.Extraction of Naphthenic Acid from Highly Acidic Oil Using Hydroxide Based Ionic Liquids[J].Energy Fuels,2014,29(4):106-111.
[8]SWATLOSKI R P,SPEAR A K,HOLBREY J D,et al.Dissolution of Ellose with Ionic Liquids[J].Journal of the American Chemical Society,2002,124(18):4974-4975.
[9]YE C F,LIU W M,CHEN Y X,et al.Room-temperature Ionic Liquids:A Novel Versatile Lubricant[J].Chemical Communications,2001,21(21):2244-2245.
[10]QU J,BLAU P J,DAI S,et al.Ionic Liquids as Novel Lubricants and Additives for Diesel Engine Applications[J].Tribology Letters,2009,35(3):181-189.
[11]SPIKES H.The History and Mechanisms of ZDDP[J].Tribology Letters,2004,17(3):469-489.
[12]SHAH F U,GLAVATSKIH S,MACFARLANE D R,et al.Novel Halogen-free Chelated Orthoborate Phosphonium Ionic Liquids:Synthesis and Tribophysical Properties[J].Phycical Chemistry Chemical Physics,2011,13(28):12865-12873.
[13]TOTOLIN V,MINAMI I,GABLER C,et al.Halogen-free Borate Ionic Liquids as Novel Lubricants for Tribological Applications[J].Tribology International,2013,67(4):191-198.
[14]KONDO Y,KOYAMA T,TSUBOI R,et al.Tribological Performance of Halogen-free Ionic Liquids as Lubricants of Hard Coatings and Ceramics[J].Tribology Letters,2013,51(2):243-249.
[15]SONG Z H,LIANG Y M,FAN M J,et al.Ionic Liquids from Amino Acids:Fully Green Fluid Lubricants for Various Surface Contacts[J].RSC Advances,2014,4(37):19396-19402.
[16]郭灵燕,姜栋,王海忠,等.磷酸酯类双离子液体的合成及摩擦学性能研究[J].摩擦学学报,2010,30(1):15-18.GUO Ling-yan,JIANG Dong,WANG Hai-zhong,et al.Tribological Behavior of the Ionic Liquid of 1,1’-(hexane-1,6-diyl)bis(3-ethyl-1H-imidazolium-1-yl)Diphosphonate as a Lubricant[J].Tribology,2010,30(1):15-18.
[17]姜栋,胡丽天,冯大鹏.磷酸酯离子液体对钢/铝摩擦副的摩擦性能研究[J].摩擦学学报,2011,31(6):599-603.JIANG D,HU L T,FENG D P.The Tribological Properties of Phosphate Ionic Liquid as Lubricant for Steel/Al Tribo-coupl[J].Tribology,2011,31(6):599-603.
[18]JIN C M,YE C F,PHILLIPS B S,et al.Polyethylene Glycol Functionalized Dicationic Ionic Liquids with Alkyl or Polyfluoroalkyl Substituents as High Temperature Lubricants[J].Journal of Materials Chemistry,2006,16(16):1529-1535.
[19]FAN M J,SONG Z H,LIANG Y M,et al.In Situ Formed Ionic Liquids in Synthetic Esters for Significantly Improved Lubrication[J].ACS Applied Materials&Interfaces,2012,4(12):6683-6689.
[20]朱立业,陈立功,陈国需,等.酯基功能化离子液体作为钢/钢摩擦副润滑剂的摩擦学性能研究[J].摩擦学学报,2012,32(2):189-194.ZHU L Y,CHEN L G,CHEN G X,et al.Tribological Properties of Ionic Liquidas Additives in Polyethylene Glycol[J].Tribology,2012,32(2):189-194.
[21]王海忠,叶承峰,刘维民.1-甲基-3-丁基咪唑六氟磷酸盐离子液的摩擦学性能[J].摩擦学学报,2003,23(1):38-41.WANG H Z,YE C F,LIU W M.Tribological Behavior of the Ionic Liquid of 1-Methyl-3-Butyl-Imidazolium Hexafluorophosphate as a Lubricant[J].Tribology,2003,23(1):38-41.
[22]刘维民,叶承峰,王海忠,等.烷基咪唑四氟硼酸盐离子液作为润滑剂的摩擦学性能[J].摩擦学学报,2001,21(6):482-484.LIU W M,YE C F,WANG H Z,et al.Tribological Behavior of the Ionic Liquid of Alkylimidazoliumtetrafluoroborate as an Additive[J].Tribology,2001,21(6):482-484.
[23]BARNHILL W C,QU J,LUO H,et al.Phosphonium-Organophosphate Ionic Liquids as Lubricant Additives:Effects of Cation Structure on Physicochemical and Tribological Characteristics[J].ACS Applied Materials&Interfaces,2014,6(24):22585-22593.
[24]MORRISSEY S,PEGOT B,COLEMAN D,et al.Biodegradable,Non-bactericidal Oxygen-Functionalised Imidazolium Esters:A Step Towards‘Greener’Ionic Liquids[J].Green Chemistry,2009,11(4):475-483.
[25]MINAMI I,INADA T,OKADA Y.Tribological Properties of Halogen-free Ionic Liquids[J].Proceedings of the Institution of Mechanical Engineers,Part J[J].Journal of Engineering Tribology,2012,226(11):891-902.
[26]SONG Z H,YU Q L,CAI M R,et al.Green Ionic Liquid Lubricants Prepared from Anti-Inflammatory Drug[J].Tribology Letters,2015,60(3):38.
[27]TOUME-PRTRILH C,DEVOISSELLE J M,VIOUX A,et al.Surfactant Properties of Ionic Liquids Containing Short Alkyl Chain Imidazolium Cations and Ibuprofenate Anions[J].Physical Chemistry Chemical Physics,2011,13(34):15523-15529.
[28]WASSERSCHEID P,HAL R,BOSMANN A.1-n-Butyl-3-Methylimidazolium([bmim])Octylsulfate—An Even‘Greener’Ionic Liquid[J].Green Chemistry,2002,4(4):400-404.
[29]FAN M J,ZHANG C Y,GUO Y N,et al.An Investigation on the Friction and Wear Properties of Perfluorooctane Sulfonate Ionic Liquids[J].Tribology Letters,2016,63(1):11.
[30]ZHANG S,MA L,DONG R,et al.Study on the Synthesis and Tribological Properties of Anti-corrosion Benzotriazole Ionic Liquid[J].RSC Advances,2017,7(18):11030-11040.
[31]宋增红,梁永民,凡明锦,等.锂离子液体作为聚乙二醇添加剂的摩擦学性能研究[J].摩擦学学报,2013,33(3):282-288.SONG Z H,LIANG Y M,FAN M J,et al.Tribological Performance of Lithium Ionic Liquids as Lubricant Additives in Poly(Ethylene Glycol)[J].Tribology,2013,33(3):282-288.
[32]韩云燕,乔旦,张霖,等.膦酸酯类离子液体作为钢/铜锡合金润滑剂的摩擦学性能及其机理研究[J].摩擦学学报,2015,35(2):160-166.HAN Y Y,QIAO D,ZHANG L,et al.Tribological Performance and Mechanism of Phosphonate Ionic Liquids as Lubricants for Steel/Tin Bronze Contact[J].Tribology,2015,35(2):160-166.
