摘要
我国油菜机械化收获割台切割振动大,引起作业效率低、质量差、落粒损失大等一系列问题。针对这些问题,为寻求稳定、高效的切割机构,对国内外可用于油菜收获的不同类型谷物收获切割机构的应用及研究现状总结分析。对在不同传动机构驱动下的割刀各项性能指标进行详细对比,最后提出存在的问题及对今后油菜收割机切割机构的研究方向和建议。
Cutting vibration of header of mechanized rapeseed harvesting in China is large,which causes a series of problems,such as low working efficiency,poor quality and large grain drop loss.Aiming at these problems,in order to seek a stable and efficient cutting mechanism,this paper summarized and analyzed the application and research status of different types of cutting mechanisms of grain harvesting which can be used in rape harvest at home and abroad.The performance indexes of the cutters driven by different transmission mechanisms are compared in detail.Finally,the existing problems and the research directions and suggestions on the cutting mechanism of rapeseed harvesters in the future are put forward.
引文
[1]吴崇友,易中懿.我国油菜全程机械化技术路线的选择[J].中国农机化,2009(2):3-6.Wu Chongyou,Yi Zhongyi.Selection of technology route of oilseed rape mechanization in entire production proceeding in China[J].Chinese Agricultural Mechanization,2009(2):3-6.
[2]吴崇友,王积军,廖庆喜,等.油菜生产现状与问题分析[J].中国农机化学报,2017,38(1):124-131.Wu Chongyou,Wang Jijun,Liao Qingxi,et al.Current status and problems of rapeseed production[J].Journal of Chinese Agricultural Mechanization,2017,38(1):124-131.
[3]吴文杰,吴崇友.油菜联合收割机割台研究现状[J].江苏农业科学,2018,46(7):5-11.
[4]李耀民.我国油菜联合收割机的现状与展望[J].农机质量与监督,2005(1):40-42.
[5]黄小毛,宗望远.油菜联合收获的研究现状及发展趋势[J].农业工程,2012,2(1):14-19.Huang Xiaomao,Zong Wangyuan.Research status and development trend of rape combine harvester[J].Agricultural Engineering,2012,2(1):14-19.
[6]吴崇友,肖圣元,金梅.油菜联合收获与分段收获效果比较[J].农业工程学报,2014,30(17):10-16.Wu Chongyou,Xiao Shengyuan,Jin Mei.Comparison of the effects of combined harvesting and segmental harvesting in rapeseed[J].Transactions of the Chinese Society of Agricultural Engineering,2014,30(17):10-16.
[7]Reitz P,Kutzbach H D.Investigations on a particular yield mapping system for combine harvesters[J].Computers and Electronics in Agriculture,1996,14(2):137-150.
[8]Friesen T L,De Wolf E D,Francl L J.Source strength of wheat Pathogens during combine harvest[J].Aerobiologia,2001,17(4):293-299.
[9]McCown R L.New thinking about farmer decision makers[J].The Farmers Decision:Balancing Economic Agriculture Production with Environmental Quality,2005:11-44.
[10]刘征明,梅林森,黄榕琳,等.四川丘陵地区油菜联合收割机设计与试验研究[J].中国农机化学报,2017,38(1):11-14,36.Liu Zhengming,Mei Linsen,Huang Ronglin,et al.Design and experimental research of rape combine harvester for hilly area in Sichuan Province[J].Journal of Chinese Agricultural Mechanization,2017,38(1):11-14,36.
[11]Zeuner K W.Dual hydraulic oscillator for the reciprocating cutter of an agricultural machine[P].U.S.Patent:5,787,786,1998-8-4.
[12]Kalsirisilp R,Singh G.PM-Power and Machinery:adoption of a stripper header for a Thai-made rice combine harvester[J].Journal of Agricultural Engineering Research,2001,80(2):163-172.
[13]Inoue E,Marutani I,Mitsuoka M,et al.Mechanical model on the driving mechanism of combines cutting section and verification[J].Journal of the Japanese Society of Agricultural Machinery,2004,66(2):61-67.
[14]Yiljep Y D,Mohammed U S.Effect of knife velocity on cutting energy and efficiency during impact cutting of sorghum stalk[J].Agricultural Engineering International:CIGR Journal,2005.
[15]Baruah D C,Panesar B S.Energy requirement model for a combine harvester,part I:development of component models[J].Biosystems Engineering,2005,90(1):9-25.
[16]Guarnieri A,Maglioni C,Molari G.Dynamic analysis of reciprocating single-blade cutter bars[J].Transactions of the ASABE,2007,50(3):755-764.
[17]武志云,卢宜青,白振力.收获机械中摆环机构理论分析[J].内蒙古工业大学学报,1997(4):49-53.Wu Zhiyun,Lu Yiqing,Bai Zhenli.Theoritical analysis of sw ay-ring mechanism on harvesting equipent[J].Journal of Inner Mongolia Polytechnic University,1997(4):49-53.
[18]吴崇友,吴俊,张敏,等.油菜毯状苗机械移栽技术研究[J].中国农机化学报,2016,37(12):6-10.Wu Chongyou,Wu Jun,Zhang Min,et al.Research on machine transplanting techniques of blanket rapeseed[J].Journal of Chinese Agricultural Mechanization,2016,37(12):6-10.
[19]杨梅,胡靖明,孙万仓,等.基于两种排种器的油菜精量穴播机对比试验研究[J].中国农机化学报,2016,37(10):10-13,32.Yang Mei,Hu Jingming,Sun Wancang,et al.Comparative experiment on precision rapeseed hill-seeder equipped two types of precision seed metering device[J].Journal of Chinese Agricultural Mechanization,2016,37(10):10-13,32.
[20]赵红乔.摆环机构的动力学仿真及有限元分析[D].长沙:湖南大学,2010.Zhao Hongqiao.The finite element analysis and Dynamics simulation of suspending link organization[D].Changsha:Hunan University,2010.
[21]汤庆,吴崇友,袁文胜,等.油菜毯状苗高速移栽机覆土镇压装置结构设计[J].中国农机化学报,2016,37(3):20-22,33.Tang Qing,Wu Chongyou,Yuan Wensheng,et al.Structure design on compacting and covering soil device of rape shallow transplanting machine[J].Journal of Chinese Agricultural Mechanization,2016,37(3):20-22,33.
[22]李杰,阎楚良,杨方飞.基于虚拟样机技术的联合收获机切割机构的仿真[J].农业机械学报,2006,37(10):74-76,135.Li Jie,Yan Chulang,Yang Fangfei.Research on cutters simulation of combine harvester based on virtual prototyping technology[J].Transactions of the Chinese Society for Agricultural Machinery,2006,37(10):74-76,135.
[23]谢飞,尹洋.收获机械切割机构的仿真分析[J].江苏农业科学,2015,43(10):474-475.
[24]周伟权,史增录,张娟,等.基于ADAMS的摆环机构运动仿真分析[J].农业科技与装备,2016(7):19-21.Zhou Weiquan,Shi Zenglu,Zhang Juan,et al.Analysis on motion simulation of pendulum ring mechanism based on ADAMS[J].Agricultural Science&Technology and equipment,2016(7):19-21.
[25]夏萍,印崧,陈黎卿.收获机械往复式切割器切割图的数值模拟与仿真[J].农业机械学报,2007,38(3):65-68.Xia Ping,Yin Song,Chen Liqing.Numerical simulation of cutting pattern of a reciprocating cutter[J].Transactions of the Chinese Society for Agricultural Machinery,2007,38(3):65-68.
[26]张猛,耿爱军,张智龙,等.谷物收获机智能监测系统研究现状与发展趋势[J].中国农机化学报,2018,39(9):85-90.Zhang Meng,Di Aijun,Zhang Zhilong,et al.Research status and development trend of intelligent monitoring system for grain harvester[J].Journal of Chinese Agricultural Mechanization,2018,39(9):85-90.
[27]王健康,吴明亮,任述光,等.往复式切割器传动运动动力学分析[J].中国农学通报,2011,27(1):190-194.Wang Jiankang,Wu Mingliang,Ren Xuguang,et al.Kinematic and dynamic analysis on reciprocating cutters cutting mechanism for rape harvester[J].Chinese Agricultural Science Bulletin,2011,27(1):190-194.
[28]杨树川.标准往复式切割器的性能研究[D].杨凌:西北农林科技大学,2011.Yang Shuchuan.Research on the working performence of the standard reciprocating cutterbarr[D].Yangling:Northwest A&F University,2011.
[29]宁新杰,金诚谦,印祥,等.谷物联合收割机风筛式清选装置研究现状与发展趋势[J].中国农机化学报,2018,39(9):5-10.Ning Xinjie,Jin Chengqian,Yin Xiang,et al.Research status and development trend of air-and-screen cleaning device for cereal combine harvesters[J].Journal of Chinese Agricultural Mechanization,2018,39(9):5-10.
[30]夏萍,陈黎卿,朱德全,等.往复式切割器参数的数值模拟及优化[J].机械工程师,2006(5):82-84.
[31]严帅.基于傅里叶级数的往复式切割器振动分析[J].中国农机化学报,2013,34(5):60-63.Yan Shuai.Vibration analysis of reciprocating cutter based on Fourier series[J].Journal of Chinese Agricultural Mechanization,2013,34(5):60-63.
[32]来旭忠,王霜,何国修.基于改进PSO算法的割刀驱动机构的优化设计[J].西华大学学报,2014,33(2):67-72.Lai Xuzhong,Wang Shuang,He Guoxiu.Optimization design of cutter drive mechanism based on improved PSOalgorithm[J].Journal of Xihua University,2014,33(2):67-72.
[33]王志明,马广,吕彭民,等.联合收获机切割器驱动装置减振设计与试验[J].浙江大学学报,2014,40(5):579-584.Wang Zhiming,Ma Guang,Lv Pengmin,et al.Design and test on vibration reduction for knife driving device of combine harvester[J].Journal of Zhejiang University,2014,40(5):579-584.
[34]金小亮,朱晓星,金诚谦,等.谷物脱粒滚筒的功耗模型研究[J].中国农机化学报,2015,36(3):30-33,38.Jin Xiaoliang,Zhu Xiaoxing,Jin Chengqian,et al.Studies of united harvest machine cutting system structure parameters on the vibration impact[J].Journal of Chinese Agricultural Mechanization,2015,36(3):30-33,38.
[35]McCredie P J.Knife section having breakage holes[P].U.S.Patent:6,467,246,2002-10-22.
[36]Gharakhani H,Alimardani R,Jafari A.Design a new cutter-bar mechanism with flexible blades and its evaluation on harvesting of lentil[J].Engineering in Agriculture,Environment and Food,2017,10(3):198-207.
[37]Celik A.Design and operating characteristics of a push type cutter bar mower[J].Canadian Biosystems Engineering,2006,48(2):23-27.
[38]耿令新,张利娟,师清翔,等.便携式谷物联合收获机锥顶蜗壳式旋风分离清选系统参数优化[J].中国农机化学报,2013(4):146-149,133.Geng Lingxin,Zhang Lijuan,Shi Qiangxiang,et al.Design of double moving-blade cutter of whole-feedig combine harvester[J].Journal of Chinese Agricultural Mechanization,2013(4):146-149,133.
[39]唐斌,袁建宁,李显旺,等.工业大麻小型立式割台切割器运动分析与仿真[J].中国农机化学报,2018,39(9):1-4.Tang Bin,Yuan Jianning,Li Xianwang,et al.Kinamatical analysis and simulation of cutter for hemp mini-type vertical cutting table[J].Journal of Chinese Agricultural Mechanization,2018,39(9):1-4.
[40]韩余,肖宏儒,金月,等.基于Nastran的茎类蔬菜切割器刀片模态分析与优化[J].中国农机化学报,2018,39(2):37-41.Han Yu,Xiao Hongru,Jin Yue,et al.Mode analysis and optimization of stem-like vegetable harvesters blade based on Nastran[J].Journal of Chinese Agricultural Mechanization,2018,39(2):37-41.
[41]陈霓,龚永坚,陈德俊,等.全喂入联合收获机双动刀切割器与驱动机构研究[J].农业机械学报,2008,39(9):60-63,29.Chen Ni,Gong Yongjian,Chen Dejun,et al.Double knife section reciprocating cutter and drive mechanism for combine[J].Transactions of the Chinese Society for Agricultural Machinery,2008,39(9):60-63,29.
[42]董建东,何增富.油菜收割机竖侧切割器的设计和研究[J].中国农机化,2008(1):1-3.Dong Jiandong,He Zengfu.Design of upright cutter of rape reaper[J].Chinese Agricultural Mechanization,2008(1):1-3.
[43]王浩.往复式切割器传动机构运动及上臂轴可靠性分析[D].昆明:昆明理工大学,2013.Wang Hao.The analysis of motion and reliability of the reciprocating cutters transmission mechanism[D].Kunming:Kunming University of Science and Technology,2013.
[44]王浩,尹志宏.往复式切割器传动机构对称性及运动性能分析[J].机械传动,2015,39(10):125-128.Wang Hao,Yin Zhihong.Analysis of symmetry and motion performance of the transmission mechanism of reciprocating cutter[J].Journal of Mechanical transmission,2015,39(10):125-128.
[45]韩正晟,李震霄,魏宏安,等.齿型链式切割器的试验研究[J].农业工程学报,1998,14(2):86-89.Han Zhengsheng,Li Zhenxiao,Wei Hongan,et al.Test research on toothed chain-cutter[J].Transactions of the Chinese Society of Agricultural Engineering,1998,14(2):86-89.
[46]韩正晟.4GG-170型高速收割机的试验分析[J].农业机械学报,2005,36(12):56-59.Han Zhengsheng.Experimental analysis of 4GG-170high speed harvester[J].Transactions of the Chinese Society for Agricultural Machinery,2005,36(12):56-59.
[47]韩正晟.高速小麦收割机的试验研究[D].兰州:甘肃农业大学,2006.Han Zhengsheng.Experimental Research on high speed wheat harvester[D].Lanzhou:Gansu Agricultural University,2006.
[49]M M Sidahmed,N S Jaber.The design and testing of a cutter and feeder mechanism for the mechanical harvesting of lentils[J].Biosystems Engineering,2004,88(3):295-304.
[50]卿上乐,区颖刚,刘庆庭.甘蔗收割机单圆盘切割器运动学分析[J].农业机械学报,2006(1):51-54.Qing Shangle,Qu Yinggang,Liu Qingting.Kinematics of single disc basecutter of sugarcane harvester[J].Transactions of the Chinese Society for Agricultural Machinery,2006(1):51-54.
[51]韩绪明,张姬,高彦超,等.锯盘式秸秆粉碎还田机的设计与试验[J].中国农机化学报,2017,38(12):7-11,73.Han Xuming,Zhang Ji,Gao Yanchao,et al.Design and test of saw disc straw crushing returning machine[J].Journal of Chinese Agricultural Mechanization,2017,38(12):7-11,73.
[52]李晓飞.柠条平茬收获机切割装置试验研究[J].中国农机化学报,2017,38(4):1-4,15.Li Xiaofei.Experimental research on cutting device of Caragana Korshinshii stumping harvester[J].Journal of Chinese Agricultural Mechanization,2017,38(4):1-4,15.
[53]黄继承,李显旺,沈成,等.苎麻联合收割机切割器的运动仿真和结构分析[J].中国农机化学报,2013,34(6):170-173.Huang Jicheng,Li Xianwang,Shen Cheng,et al.Kinematics simulation and structural analysis on cutter of ramie combine harvester[J].Journal of Chinese Agricultural Mechanization,2013,34(6):170-173.
[54]李仲恺,谢方平,刘科,等.油菜收获圆盘式切割器的设计与性能试验[J].湖南农业大学学报,2014,40(1):83-88.Li Zhongkai,Xie Fangping,Liu Ke,et al.Design and performance evaluation of disc cutter for rapeseed harvest[J].Journal of Hunan Agricultural University,2014,40(1):83-88.
[55]李仲恺.圆盘式油菜切割器的设计与试验[D].长沙:湖南农业大学,2014.Li Zhongkai.Design and experiments of the rape disccutter[D].Changsha:Hunan Agricultural University,2014.
[56]黄丙申,刘丽影,于占国.行星齿轮传动机构在联合收割机割刀驱动上的应用[J].现代化农业,2002(8):31-32.
[57]徐伟城,姜蕾,王振发.浅谈行星齿轮摆环箱的设计及应用[J].机械研究与应用,2008(3):43-44.Xu Weicheng,Jiang Lei,Wang Zhenfa.Design theory and application of planet gear style wobble box[J].Mechanical Research&Application,2008(3):43-44.
[58]秦广明,赵映,肖宏儒,等.高速双动小型手扶式叶菜收获机设计与运动分析[J].中国农机化学报,2015,36(5):9-12.Qin Guangming,Zhao Ying,Xiao Hongru,et al.Design and movement analysis of double-acting cutting device of small walking leafy vegetables harvester[J].Journal of Chinese Agricultural Mechanization,2015,36(5):9-12.
[59]李陆俊.割刀行星齿轮传动机构的优化设计研究[D].杨凌:西北农林科技大学,2011.Li Lujun.Research on optimum design of planetary gear transmission mechanism for cutterbar[D].Yangling:Northwest A&F University,2011.
[60]郝志勇,刘伟,闫闯,等.联合收割机割刀驱动行星齿轮系多目标优化设计[J].黑龙江农业科学,2011(11):115-117.Hao Zhiyong,Liu Wei,Yan Chuang,et al.Sickle mechanism of combined harvesters of drive planetary gear train multi-objective optimization[J].Heilongjiang Agricultural Sciences,2011(11):115-117.
